mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   The Dead Zone (http://www.mcarterbrown.com/forums/dead-zone/)
-   -   Interest thread (http://www.mcarterbrown.com/forums/dead-zone/215775-interest-thread.html)

jcurt455 10-11-2012 11:13 AM

Interest thread
 
Ok so the boss and I were talking and since thing are slow we were going to do a couple of things. I just want to get an Idea of interest on 2 things

Blank merlin body- will proably have an MSRP of $65. On this I will most likely do a deposit as long as the mods let me.

Next would be a slot blocking sled for halfblocks. Alum or Delrin? Not real sure on price point yet.

dukie 10-11-2012 12:58 PM

This would probably get more attention in the dead zone for the interest portion. If it looks good and you get mod approval then make a thread in here.

russc 10-11-2012 02:13 PM

The merlin body...is it threaded for barrels, frames etc?

sniper42 10-11-2012 03:58 PM

I would possibly be interested in a merlin blank, depending on whether it is threaded like russc mentioned.

SoKoPaTh 10-11-2012 05:14 PM

depending on the price, i'd look into the slot blocking sled

jcurt455 10-11-2012 05:37 PM

Please move the thread to where ever you feel it needs to be, sorry.

The body's will have all features needed to be a working body. They just won't have any fancy milling. I do plan on milling on some maybe as an option.

dukie 10-11-2012 06:17 PM

Done

I wasnt criticising, i was just suggesting you would get a better response here in the deadzone. more people lurk here :)

sniper42 10-11-2012 06:25 PM

I have always liked the round body merlins but I imagine those would cost significantly more. ;)

Bigtuana 10-11-2012 07:12 PM

I'd be interested in a half blocked merlin blank with a slot blocker :)

Just kidding, I wouldn't do that two a merlin, but I'd still be interested in both.

Falcone 10-11-2012 07:28 PM

Yes, depending on what milling is done to the blanks I'd be interested. Round body would be ideal, I would be totally fine with it if it had ridges like those CCM guns to cut down on processes. I just want it light.


All times are GMT -4. The time now is 09:34 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC