Brass Freak compatible inserts - Page 67

Deuce · 05-31-2012, 01:57 PM

Quote:

Originally Posted by Dr. VonDeafingson

Quick question on the brass inserts.

I'm looking to get a .670 insert from you. My buddy has one and loaned it to me, and it doesnt fit in my WWA phantom barrel. Is it possible to make it with a slightly smaller OD so that it slides in? It gets about half way in then encounters (a lot of) resistance.

That's interesting, my Ty inserts work fine in my DW and WWA back.

Dr. VonDeafingson · 05-31-2012, 01:58 PM

I may pick one up in the immediate future then.

tymcneer · 06-12-2012, 04:10 AM

Ok... I am working on collecting funds toward a laser engraver for a few future projects.

On that note, I am going to make a one time good deal...

I am placing 25 inserts, of any size, up for sale at the normal price, but I will cover the shipping. When these are gone, the deal is over. The sooner this happens, the better it is for everyone. As an added bonus, if this happens within the next two weeks, and people wish to wait a little while longer (approximately 2 weeks to account for shipping and setup time), I will engrave the size using the new laser engraver.

I will be counting down the orders in this thread and in my signature.

If this doesn't make sense, please excuse me, I am working on next to no sleep.

Ty

Current Status:
TimmyCuddler - 1x.685 - Paid - Ship ASAP
Dr. VonDeafingson - 2x.665, 2x.670 - Paid - Laser on size
Cruickid - 1x.665, 1x.678 - Paid - Ship ASAP

shopnow - 1x.680 - Paid - Laser on size
Feyd - 1x.680 - Paid - Laser on size
Sean_Chip - 1x.678, 1x.680, 1x.685 - Paid - Laser on size
Artguy63 - 1x.670 - Paid - laser on size
pghp8ntballer - 1x.675 - Paid - Laser on size
Dr PhunkyPants - 1x.685 - Paid - Laser on size
IndustrialHalo - 1x.670, 1x.675 - Paid - Laser on size

Chiko - 1x.670, 2x.675, 1x.678, 2x.680, 2x.685 - Paid - Undetermined on lasering
PyschoDad - 1x.670 - Paid - ???

Total sold 25 paid/0 unpaid/0 remaining of 25 total

<Professor Hubert Farnsworth voice>Good news everyone! The laser engraver is on order. My birthday netted me a bit of cash, so I covered the difference between the sale and the price. So unlike my last crew... What was I saying?</voice>

<Professor Hubert Farnsworth voice>Better news everyone!</voice>
The laser has been found by UPS and delivered to me. I have unboxed it and there appears to be no damage. I will hopefully get a few minutes this weekend to set it up and try it out, though work is killing me.

Timmycuddler · 06-12-2012, 07:04 AM

I'll take a .685 plz

Dr. VonDeafingson · 06-12-2012, 09:51 AM

Put me down for a .670 then!

EDIT: just noticed you have .665 too, I'll take one of those as well.

EDIT #2: my teammate wants in, so two of each

Final count:

2x .665's
2x .670's

shopnow · 06-12-2012, 12:52 PM

Ty new here:

of any size?
Can I get a .680

D3adpool · 06-12-2012, 02:20 PM

Ty,

Do you do Poison Arrow inserts as well?

tymcneer · 06-12-2012, 04:11 PM

Quote:

Originally Posted by Dr. VonDeafingson

Put me down for a .670 then!

EDIT: just noticed you have .665 too, I'll take one of those as well.

EDIT #2: my teammate wants in, so two of each

Final count:

2x .665's
2x .670's

Quote:

Originally Posted by shopnow

Ty new here:

of any size?
Can I get a .680

PM's are inbound to you both.

Quote:

Originally Posted by D3adpool

Ty,

Do you do Poison Arrow inserts as well?

I have been asked this question a bunch of times, but, for the life of me, I can not remember the answer. I know I have *NOT* made any, but I am not sure if I can make them.

Do a quick test, and see if a standard Freak insert will fit into the Poison Arrow back. If it will, and is not too loose, then I need to know if there are any additional mechanical features, such as notchs, ribs or lips that I must replicate.

Ty

Cruickid · 06-12-2012, 05:09 PM

Hey Ty, I will take two freak inserts on this deal.

1x .665
1x .678

Quick question since I haven't been on keeping an eye on this thread in awhile:

I currently have the other four (.670, .675, .680, .685) with the Mayvik marks; how are these other two new sizes marked?

Feyd · 06-12-2012, 05:18 PM

Put me down for a .680, I have .675&.670 I have the rest in SS. And I'll wait for the engraving. On that note could I send back the other 2 later and get them engraved as well. I will pay to have it done. Also I'm still hoping for the .675 & .678 in the CCM internal sizers some day! Thanks and let me know when you want the $ Feyd..............

06-12-2012, 04:10 AM	#663 (permalink)
tymcneer Brass Monkey Customs Join Date: Oct 2006 Location: Baltimore MD	Ok... I am working on collecting funds toward a laser engraver for a few future projects. On that note, I am going to make a one time good deal... I am placing 25 inserts, of any size, up for sale at the normal price, but I will cover the shipping. When these are gone, the deal is over. The sooner this happens, the better it is for everyone. As an added bonus, if this happens within the next two weeks, and people wish to wait a little while longer (approximately 2 weeks to account for shipping and setup time), I will engrave the size using the new laser engraver. I will be counting down the orders in this thread and in my signature. If this doesn't make sense, please excuse me, I am working on next to no sleep. Ty Current Status: TimmyCuddler - 1x.685 - Paid - Ship ASAP Dr. VonDeafingson - 2x.665, 2x.670 - Paid - Laser on size Cruickid - 1x.665, 1x.678 - Paid - Ship ASAP shopnow - 1x.680 - Paid - Laser on size Feyd - 1x.680 - Paid - Laser on size Sean_Chip - 1x.678, 1x.680, 1x.685 - Paid - Laser on size Artguy63 - 1x.670 - Paid - laser on size pghp8ntballer - 1x.675 - Paid - Laser on size Dr PhunkyPants - 1x.685 - Paid - Laser on size IndustrialHalo - 1x.670, 1x.675 - Paid - Laser on size Chiko - 1x.670, 2x.675, 1x.678, 2x.680, 2x.685 - Paid - Undetermined on lasering PyschoDad - 1x.670 - Paid - ??? Total sold 25 paid/0 unpaid/0 remaining of 25 total <Professor Hubert Farnsworth voice>Good news everyone! The laser engraver is on order. My birthday netted me a bit of cash, so I covered the difference between the sale and the price. So unlike my last crew... What was I saying?</voice> <Professor Hubert Farnsworth voice>Better news everyone!</voice> The laser has been found by UPS and delivered to me. I have unboxed it and there appears to be no damage. I will hopefully get a few minutes this weekend to set it up and try it out, though work is killing me. __________________ Brass Monkey Customs If you were doing business with me via text message, please send me a text with your name, as my phone has killed my contact list. Thank you in advance. Brass Freak compatible and Equation inserts in .665, .670, .675, .678, .680 and .685 Still selling brass tubing, with .678 barrel stock now available! My feedback: MCB - eBay - AO Last edited by tymcneer; 07-11-2012 at 10:16 PM. Reason: Updating list

06-12-2012, 07:04 AM	#664 (permalink)
Timmycuddler Cloud Cuckoolander Join Date: Feb 2009 Location: KCMO	I'll take a .685 plz __________________ MCB Feedback!IOG Feedback! My Unofficial Rotor Manual! The Llama Cavalry Has Arrived!!! I'm a PC, and LINUX was my idea!

06-12-2012, 02:20 PM	#667 (permalink)
D3adpool the main man Join Date: Aug 2010 Location: NYC	Ty, Do you do Poison Arrow inserts as well? __________________ D3adpool's Depot! NEW ITEMS ADDED: Lapco tigthsticks, Deadlywind Fibur & BRAND NEW Check-it bolts!! GEN1: AVRATECH R7. SERIAL #9. FOR SALE: My Feedback:

06-12-2012, 05:18 PM	#670 (permalink)
Feyd Olde Basterd#2 Join Date: Oct 2008 Location: Combat Zone club 66	Put me down for a .680, I have .675&.670 I have the rest in SS. And I'll wait for the engraving. On that note could I send back the other 2 later and get them engraved as well. I will pay to have it done. Also I'm still hoping for the .675 & .678 in the CCM internal sizers some day! Thanks and let me know when you want the $ Feyd.............. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-12-2012, 12:52 PM	#666 (permalink)
shopnow Newbie Join Date: Jun 2012	Ty new here: of any size? Can I get a .680