-   DIY Tech (
-   -   Detent for Nelson 007 (

paintman161 01-29-2013 03:14 PM

Detent for Nelson 007
SO i was thinking there had to be a way of getting a detent onto the 007 and not using nail polish.

So this is what i was able to come up with. Using a Hammer 7 Detent, I Drilled a hole just in front of the front screw hole and recessed the detent, drill another hole in the trigger frame plate for a small spring. See the pics below.

and it works very well, no more roll outs with small paint.

brokeass_baller 03-05-2013 10:42 AM

That's really clever! Great job!

pghp8ntballer 03-05-2013 10:47 AM

what size drill bit did you use for the detent hole in the body?

paintman161 03-05-2013 11:19 AM

uhh, i dont remember, i think maybe 1/8" ??

DashHopes 03-05-2013 11:28 AM

I'm looking forward to seeing how you did this first hand!!

pghp8ntballer 03-05-2013 11:34 AM

lol. That would be my response too. Just wing it.

DunXWright 03-05-2013 12:28 PM

This is a rather interesting way of going about a 007 detent!

My main question would be how well it works in comparison with a fishing line mod, which is what I did on mine. Probably more durable and more able to shoot sub-.68 paint :P

On a side note, do you have a source for these? I'll be looking to pick one up and try this out for myself!


paintman161 03-05-2013 01:07 PM

the detents are from the hammer 7, so i am not sure if they are out yet to purchase you may need to contact kingman and ask to buy some.

All times are GMT -4. The time now is 04:01 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC