mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 03-26-2013, 05:18 PM   #1 (permalink)
Newbie
 
Join Date: Mar 2013

Leak from on/off switch on DM5

Alrighty, my DM5's on/off plug is leaking like crazy from the little gap right infront of the noid but behind the plug. I rebuilt and lubed both the bolt kit and the on/off plug. I also took apart the noid, looks fine. My Hyper 2 is at 3 turns out, LPR is at 5 turns out. It only leaks when I air it up and turn the on/off valve to the on position. In the video below I was barely turning the valve on and it was a very loud leak. Please watch it. Any ideas? Thanks.

****ing On/Off leaking again - YouTube

PLEASE WATCH THE VIDEO.
dannyboy768 is offline   Reply With Quote
Old 03-27-2013, 12:13 AM   #2 (permalink)
Post Whore
 
Tracker's Avatar
 
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

CCM Fan
AKA Fan
bolt sail o-ring is too small, go up one size larger from what it is now

http://www.dyepaintball.com/manuals/...DM5_Manual.pdf

page 9 o-ring labeled #2 size should be 015

it WILL sound like a leak from the noid, but its not, its coming from one of the vent holes, because the air is going out the nearest exit

Tracker
__________________

^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote
Old 03-27-2013, 01:30 AM   #3 (permalink)
Newbie
 
Join Date: Mar 2013

Quote:
Originally Posted by Tracker View Post
bolt sail o-ring is too small, go up one size larger from what it is now

http://www.dyepaintball.com/manuals/...DM5_Manual.pdf

page 9 o-ring labeled #2 size should be 015

it WILL sound like a leak from the noid, but its not, its coming from one of the vent holes, because the air is going out the nearest exit

Tracker
The o-ring i put on the sail IS a size 15...should I just try a 16 anyways?
dannyboy768 is offline   Reply With Quote
Old 03-27-2013, 12:26 PM   #4 (permalink)
Post Whore
 
Tracker's Avatar
 
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

CCM Fan
AKA Fan
well its not like it will make it leak any less at this point

Tracker
__________________

^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote
Old 03-27-2013, 07:34 PM   #5 (permalink)
Newbie
 
Join Date: Mar 2013

I tried putting in another fresh 015 bolt sail..gun shoots without leaks thank you very much!
dannyboy768 is offline   Reply With Quote
Old 03-28-2013, 04:24 PM   #6 (permalink)
Newbie
 
Join Date: May 2012

buy a flow plug from 187paintball.com
freak16 is offline   Reply With Quote
Old 03-29-2013, 01:19 AM   #7 (permalink)
Post Whore
 
Tracker's Avatar
 
Join Date: Apr 2006
Location: Las Vegas NV
Send a message via Yahoo to Tracker Send a message via Skype™ to Tracker

CCM Fan
AKA Fan
we fixed it. it wasnt the flow plug anyways

Tracker
__________________

^And i did it while wearing a helmetcam^ in 1080P HD if you need proof
Trackers feedback
Tracker is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Dye

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC