|
             |
 |
|
| Electronic If it uses batteries, and fires paintballs... This is the place to sell it. |
 |
| | LinkBack | Thread Tools | Search this Thread |
04-06-2007, 12:15 PM
| #2 (permalink) |
| MCB Member  Join Date: Jul 2006 Location: Deer Park, NY  | Hey how does the eye ribbon get under the body? does the top come off the bottom? Also what threads are the front block? Im so tempted to get the body to make it into a pump..
__________________  RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball |
|  |
|
04-06-2007, 12:33 PM
| #3 (permalink) | |
| Active Member Join Date: Sep 2006 | Quote:
the 'reflective' eye is on the bottom of the breach & faces straight up - the body is actually milled out to accommodate the eye ribbon & cover - the upper & lower body can be seperated for maintenece, etc... - the front block does take the standard bajo bolt of a 2K+ you can learn more about the body here the only issue you might have with a pump is the arm - it takes a 'straight' pump arm with NO bend in it, the idea is to have less stress on the arm itself - the pump arm is made very specific for this marker & I am not sure what the threading is to attach to the back block (I don't thinks it's a standard 10-32) | |
| |
|
04-06-2007, 12:49 PM
| #5 (permalink) |
| Pumper  Join Date: Apr 2006 Location: Jax, FL | PM sent.....
__________________ DCB<>< John 14:6 CPPA #1092 Pump Gun Pimp #80 LPPC #164 Feedback http://www.mcarterbrown.com/forums/f...html#post78710 Gallery http://www.mcarterbrown.com/gallery/...er=184&cat=500  |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
