Just being safe

hellbatman · 03-22-2008, 11:48 PM

I have an '04 BKO
I am 99% sure this is perfectly fine and safe and all that...but I have to make sure!
I would like to use an ASA-1/8 adapter to put my gauge where the Regulator would normally go
There is no reason that wouldn't work right?
Should lead to no issues of over pressurizing anything or anything right?
Thanks
Curtis

pizzaluvr · 03-22-2008, 11:55 PM

As long as you still have a regulator on it it will be fine. I'm not sure of the exact Operating Pressure of a BKO, but I know it's less than the 800 PSI or even 400 PSI of an HPA tank, so going straight into it wouldn't be an option.

hellbatman · 03-22-2008, 11:59 PM

Haven't used it in a while...but if memory serves correct its around 250-300
Let the customization begin!
Thanks
Curtis

pizzaluvr · 03-23-2008, 12:07 AM

You could always get a reg with a guage on it if that's what you want.

hellbatman · 03-23-2008, 12:10 AM

Well its more just making use of the ports...I would rather have a guage there for easier reference...
The reg is to be a funky place when its done
Thanks
Curtis

Litespeed · 03-23-2008, 06:17 PM

As long as you have a reg somewhere to drop it into the 200s range and all connections properly made, you should be fine.

pump · 03-30-2008, 03:57 AM

or start from 0 psi and raise till you get normal FPS and youll probably be only 220ish

pizzaluvr · 03-30-2008, 07:38 PM

start what from 0 psi and raise?

EDIT: 2000 posts

63VDub · 03-30-2008, 11:23 PM

hpr, man, you do cover some ground.

pizzaluvr · 03-30-2008, 11:26 PM

Quote:

Originally Posted by 63VDub

hpr, man, you do cover some ground.

I thought the original posters idea was to not run an HPR, just a gauge.

03-22-2008, 11:48 PM	#1 (permalink)
hellbatman Rec Poster Join Date: Apr 2007 Posts: 63	Just being safe I have an '04 BKO I am 99% sure this is perfectly fine and safe and all that...but I have to make sure! I would like to use an ASA-1/8 adapter to put my gauge where the Regulator would normally go There is no reason that wouldn't work right? Should lead to no issues of over pressurizing anything or anything right? Thanks Curtis

03-23-2008, 06:17 PM	#6 (permalink)
Litespeed Active Member Join Date: Feb 2007 Location: Tullahoma, TN Posts: 293	As long as you have a reg somewhere to drop it into the 200s range and all connections properly made, you should be fine. __________________ Litespeed's Feedback

03-30-2008, 03:57 AM	#7 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 611	or start from 0 psi and raise till you get normal FPS and youll probably be only 220ish __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-22-2008, 11:59 PM	#3 (permalink)
hellbatman Rec Poster Join Date: Apr 2007 Posts: 63	Haven't used it in a while...but if memory serves correct its around 250-300 Let the customization begin! Thanks Curtis

03-23-2008, 12:10 AM	#5 (permalink)
hellbatman Rec Poster Join Date: Apr 2007 Posts: 63	Well its more just making use of the ports...I would rather have a guage there for easier reference... The reg is to be a funky place when its done Thanks Curtis