mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Kingman (http://www.mcarterbrown.com/forums/kingman/)
-   -   ECAP Pump handles and stock class feeds for the Hammer7 (http://www.mcarterbrown.com/forums/kingman/223313-ecap-pump-handles-stock-class-feeds-hammer7.html)

BigOldSkool 01-12-2013 12:13 PM

ECAP Pump handles and stock class feeds for the Hammer7
 
Just trying to figure out if there is a market enough to make a prototype. One thing though they are not going to be cheap. I would have to have the cocking arms made out of aluminum, which if the interest is enough I will have them laser cut at work instead of machined.

Likely because of the way they have to be made I will be sticking with one design so my custom part aspect that I normally offer won't be available for these... granted I will make options for mounting rails on the final design.


While on the topic of products... any one for stock class feeds? These will be black delrin capable of rock back and rock forward feeding and set up fro cram and jam style.

Any one down for those?

Bored383 01-12-2013 12:21 PM

stock class feed, yeah

skullcandy1993 01-12-2013 01:18 PM

i might be interested in a pump handle depending on price

nerdcore 01-12-2013 05:50 PM

How much more to make the stock class feed a spring feed?

Not really interested in a new pump handle.

BigOldSkool 01-12-2013 07:00 PM

Alot... I would have to source all the parts to make them.

heinous 01-12-2013 07:23 PM

what's an ecap pump handle?

BigOldSkool 01-12-2013 09:49 PM

Ecap is me... or rather my machine shop.

heinous 01-12-2013 09:50 PM

i derped. i thought it was some kind of battery powered thingy

nerdcore 01-12-2013 11:43 PM

Quote:

Originally Posted by BigOldSkool (Post 2590780)
Alot... I would have to source all the parts to make them.

Hm. Scratch that then.

How 'bout, spring feed "ready?" Like the channel for the spring guide knob is milled, but end user is responsible for finding and installing the spring & stuff?

BigOldSkool 01-13-2013 12:18 AM

I would still need to source thin wall aluminum tube. The intent here is a cheap bolt on cram and jam feed block.


All times are GMT -4. The time now is 12:03 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC