mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 03-13-2013, 06:19 PM   #11 (permalink)
Rec Poster
 
Join Date: Feb 2013

Quote:
Originally Posted by scribbleheli View Post
Sorry, bad wording. I didn't change the detent. Just applied my "fix"
and if you take out the detent. (you know, the tiny little sliver of plastic 1/8 of inch wide and like half an in long)

Cut a piece of double sided foam tape that exact size, then cut off some of the end that would go under the barrel o-ring, and stick it to the denten. replace the detent into the barrel. then place a small piece of scotch tape over that, but make sure not to inter-fear with the barrel O-ring.
ok i think i got it.... but ur saying the tape will be on the inside of the barrel?

sorry im at work so trying to remember all this off the top of my head lol
Seksirojo is offline   Reply With Quote
Old 03-13-2013, 10:48 PM   #12 (permalink)
Active Member
 
scribbleheli's Avatar
 
Join Date: Mar 2013

No, tape the outside.
I would take Pics but I was at work. Now Im at school.
Step by step best to my ability


1. remove barrel
2. locate detent
3. cut piece of 3m double sided foam tape or similar (YMMV), 1/8" wide, 3/8" ish long
4. place 3m tape on backside of detent (the part that's on the outside of the barrel, furthest from the barrel O-ring.
5. place square of scotch tape roughly 3/8" x 3/8" in size over foam piece/detent, ensure good adhesion. (this holds the foam in and provides backboard to make detent stiffer.)
6. Insert barrel
7. shoot neighbors garage.
Best way I can think to test is get paint just small enough to roll out of barrel. And do the shake test. See if any paint makes it past the detent and just rolls out.
Its easy to tell with qloader or other force feed.
Let it feed. Aim the barrel down. Paint rolls out. Try something else.
scribbleheli is offline   Reply With Quote
Old 03-14-2013, 01:41 PM   #13 (permalink)
Rec Poster
 
Join Date: Feb 2013

Quote:
Originally Posted by scribbleheli View Post
No, tape the outside.
I would take Pics but I was at work. Now Im at school.
Step by step best to my ability


1. remove barrel
2. locate detent
3. cut piece of 3m double sided foam tape or similar (YMMV), 1/8" wide, 3/8" ish long
4. place 3m tape on backside of detent (the part that's on the outside of the barrel, furthest from the barrel O-ring.
5. place square of scotch tape roughly 3/8" x 3/8" in size over foam piece/detent, ensure good adhesion. (this holds the foam in and provides backboard to make detent stiffer.)
6. Insert barrel
7. shoot neighbors garage.
Best way I can think to test is get paint just small enough to roll out of barrel. And do the shake test. See if any paint makes it past the detent and just rolls out.
Its easy to tell with qloader or other force feed.
Let it feed. Aim the barrel down. Paint rolls out. Try something else.
cool thanks alot man!
Seksirojo is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Kingman

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:59 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC