mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   KPCS Customs (http://www.mcarterbrown.com/forums/kpcs-customs/)
-   -   Powder Coating Color's & Gallery. (http://www.mcarterbrown.com/forums/kpcs-customs/160592-powder-coating-colors-gallery.html)

KPCS 05-02-2011 07:28 PM

Powder Coating Color's & Gallery.
 
Updated color chart.

https://www.facebook.com/media/set/?...1&l=4b2ae21f64

KPCS 05-02-2011 07:28 PM

Marker I have done in Powder Coating......

Light Blue to Yellow.
https://scontent.fdtw1-1.fna.fbcdn.n...85&oe=5936D107

Wrinkle Black
https://scontent.fdtw1-1.fna.fbcdn.n...aa&oe=5970755B

Copper Metallic
https://scontent.fdtw1-1.fna.fbcdn.n...0e&oe=596FF225

Smoked Chrome
https://scontent.fdtw1-1.fna.fbcdn.n...56&oe=5969B796

Blue to Red
https://scontent.fdtw1-1.fna.fbcdn.n...d4&oe=5929E918

Translucent Red over polishing.
https://scontent.fdtw1-1.fna.fbcdn.n...dd&oe=5932ECFF

Translucent Orange
https://scontent.fdtw1-1.fna.fbcdn.n...6e&oe=5932E3D3

Translucent Red over polished & bead blasted design.
https://scontent.fdtw1-1.fna.fbcdn.n...c9&oe=5972409B

Prism Green
https://scontent.fdtw1-1.fna.fbcdn.n...d6&oe=5936FF42

Clear to Translucent Blue over polishing.
https://scontent.fdtw1-1.fna.fbcdn.n...b9&oe=596D34E5

Pewter Wrinkle
https://scontent.fdtw1-1.fna.fbcdn.n...e7&oe=59606ABE

White
https://scontent.fdtw1-1.fna.fbcdn.n...6d&oe=59683FF6

Red, White, Blue
https://scontent.fdtw1-1.fna.fbcdn.n...1d&oe=596FAC11

https://scontent.fdtw1-1.fna.fbcdn.n...69&oe=596CC6F0

https://scontent.fdtw1-1.fna.fbcdn.n...23&oe=592A33BC

Thanks for looking ...

Ken W

chadders 06-14-2011 07:24 AM

ken would it be possable to do stripes on a gun via powercoating?

Robertsr 06-14-2011 09:16 AM

Here's a couple of pieces of Ken's work for me.

http://i52.photobucket.com/albums/g2...8JwBLQv6GM.jpg
Before Ken

http://i52.photobucket.com/albums/g2...1/1000612y.jpg
Polished

http://i52.photobucket.com/albums/g2...1/1000646h.jpg
Coated

http://i52.photobucket.com/albums/g2...10603-1937.jpg
Assembled


http://i52.photobucket.com/albums/g2...1/DSCF2470.jpg
Also Ken's excellent work

KPCS 06-14-2011 05:05 PM

Quote:

Originally Posted by chadders (Post 1874569)
ken would it be possable to do stripes on a gun via powercoating?

Yes it can be done but then your talking about a base powder coat color then tape off the strip then re powder coat, remove the tape then do a clear powder coat over everything. That's a lot of build up of powder coating. That's 3 coats....

How ever there is another way if the strips don't need to be 2 different colors.

https://scontent.fdtw1-1.fna.fbcdn.n...9f&oe=5973D0BD

https://scontent.fdtw1-1.fna.fbcdn.n...7a&oe=59640DF6

https://scontent.fdtw1-1.fna.fbcdn.n...38&oe=5925A518

https://scontent.fdtw1-1.fna.fbcdn.n...bb&oe=592A71B0


Ken W

TOTShadow 06-17-2011 11:28 PM

Can I get a quote for just polishing? I have a mix of stainless and alum. parts. Custom milled Minimag.

BlueDragonX 06-18-2011 12:24 AM

Hmm, really like those wrinkle coats. Very nice work you do, sir.

Feyd 06-18-2011 01:44 PM

Hello I was wondering the same thing about polishing, how much would it be to strip the anno off a Carter comp and polish it? Feyd.............

KPCS 06-19-2011 12:37 AM

Quote:

Originally Posted by TOTShadow (Post 1880428)
Can I get a quote for just polishing? I have a mix of stainless and alum. parts. Custom milled Minimag.

Price depends on how many parts you need polished.
Also the condition of the parts ( are they pitted, scratched, nicked, etc.. ).

Quote:

Originally Posted by BlueDragonX (Post 1880484)
Hmm, really like those wrinkle coats. Very nice work you do, sir.

Thank you ....



Quote:

Originally Posted by Feyd (Post 1880896)
Hello I was wondering the same thing about polishing, how much would it be to strip the anno off a Carter comp and polish it? Feyd.............

Stripping fee is $15.00 flat rate.
Polishing again depends on how many parts & the condition of the parts.

Ken W

Feyd 06-19-2011 08:55 AM

New style Carter Comp with an L stock. If you could give me a ball park that I under stand would be just that I will have a better idea of what I'm getting into. Also lets take the rest of this to the PM's I think. Thanks, Feyd.............


All times are GMT -4. The time now is 12:18 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC