ACI Turret

doc Zox · 04-13-2011, 11:02 PM

It holds 5, 12 grams and the Havoc gets 2 launches per 12 gram.

It has a backcheck valve, so when you flip the lever
and change to a new cartridge, you don't lose the pressure in the gun.

Its more compact than the AGD 6-Pack magazine feeder
and the machining is quite nice.

heres a tear down:
ACI Turret

-=ArchAngel=- · 04-14-2011, 12:57 AM

OMG WANT!!
looks to be in great condition. Where'd you snatch one from?

Legato · 04-14-2011, 01:18 AM

I love mine dearly, but need to get it modded. Due to 12 gram depths being inconsistent mine doesn't puncture all 12 grams anymore. SOme it won't even puncture at all. Need to add a set screw on the plunger of the Turret stock so i can adjust the depth it pushes the 12 gram. Other then that, love it

ThorsHammer45 · 04-14-2011, 08:44 AM

Hi. I had a couple of questions for you if you don't mind:

1. Was it difficult to mount the shotgun grip to the Havoc?
2. How did you mount the top rail plus the ASA at the same time? I saw your other photos with a direct tank mount and am interested in that same setup.

Any help would be greatly appreciated. Thanks!

doc Zox · 04-14-2011, 10:57 AM

any mods to the lever plunger might not permit the turret to rotate
I wonder if a pad of refrigerator magnet on the cartridge would work.

the havoc mod starts with the undermount kit

the rail mount grips a bent section of tac rail
with the ASA bolted on and a 3 inch length of macro tubing

the 870 shotgun pistol grip is attached with an inset allen bolt through the back plate and a washer & aircraft retention bolt on the back side

doc Zox · 04-14-2011, 11:04 AM

Bow · 04-14-2011, 02:47 PM

Hey doc Zox, How much do these bad boys go for?

doc Zox · 04-14-2011, 03:12 PM

they are running about 200 bucks on here, ebay, PBN & elsewhere

when they were closed out at iisport ~ 6 years ago they were $39.95

its pretty obvious they have a ton of precision machining in them

Bow · 04-14-2011, 09:09 PM

Wow, I wish I played back then =P, You should make a video of it working. I live in Vegas, so most of the people here are rentals or Tournament kids, I'd be really interested to see it in action.

Thanks.

doc Zox · 04-14-2011, 09:30 PM

Maybe i should run it thru a stabilizer then into my Viking.
At 20 BPS, i might get 100 balls fired in 10 seconds!

04-13-2011, 11:02 PM	#1 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006	ACI Turret It holds 5, 12 grams and the Havoc gets 2 launches per 12 gram. It has a backcheck valve, so when you flip the lever and change to a new cartridge, you don't lose the pressure in the gun. Its more compact than the AGD 6-Pack magazine feeder and the machining is quite nice. heres a tear down: ACI Turret Last edited by doc Zox; 04-13-2011 at 11:09 PM.

04-14-2011, 01:18 AM	#3 (permalink)
Legato Insane Psychopath. :D Join Date: Jul 2006 Location: Milford MA	I love mine dearly, but need to get it modded. Due to 12 gram depths being inconsistent mine doesn't puncture all 12 grams anymore. SOme it won't even puncture at all. Need to add a set screw on the plunger of the Turret stock so i can adjust the depth it pushes the 12 gram. Other then that, love it __________________ my photobucket - Marker animations - MCB Feedback - Ebay Feeback "No matter how strong, for a human to fight a monster means he has submerged his humanity and transformed himself into a greater monster." - Schierke "If you are always worried about crushing the ants beneath you, you won't be able to walk." - Guts

04-14-2011, 08:44 AM	#4 (permalink)
ThorsHammer45 Active Member Join Date: Jan 2011	Havoc Hi. I had a couple of questions for you if you don't mind: 1. Was it difficult to mount the shotgun grip to the Havoc? 2. How did you mount the top rail plus the ASA at the same time? I saw your other photos with a direct tank mount and am interested in that same setup. Any help would be greatly appreciated. Thanks!

04-14-2011, 10:57 AM	#5 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006	any mods to the lever plunger might not permit the turret to rotate I wonder if a pad of refrigerator magnet on the cartridge would work. the havoc mod starts with the undermount kit the rail mount grips a bent section of tac rail with the ASA bolted on and a 3 inch length of macro tubing the 870 shotgun pistol grip is attached with an inset allen bolt through the back plate and a washer & aircraft retention bolt on the back side Last edited by doc Zox; 04-14-2011 at 11:05 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-14-2011, 12:57 AM	#2 (permalink)
-=ArchAngel=- Post Whore Join Date: Oct 2009	OMG WANT!! looks to be in great condition. Where'd you snatch one from?

04-14-2011, 11:04 AM	#6 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006

04-14-2011, 02:47 PM	#7 (permalink)
Bow Active Member Join Date: Jun 2010 Location: Las Vegas, NV	Hey doc Zox, How much do these bad boys go for?

04-14-2011, 03:12 PM	#8 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006	they are running about 200 bucks on here, ebay, PBN & elsewhere when they were closed out at iisport ~ 6 years ago they were $39.95 its pretty obvious they have a ton of precision machining in them

04-14-2011, 09:09 PM	#9 (permalink)
Bow Active Member Join Date: Jun 2010 Location: Las Vegas, NV	Wow, I wish I played back then =P, You should make a video of it working. I live in Vegas, so most of the people here are rentals or Tournament kids, I'd be really interested to see it in action. Thanks.

04-14-2011, 09:30 PM	#10 (permalink)
doc Zox Shop Smart,Shop S-Mart Join Date: Jul 2006	Maybe i should run it thru a stabilizer then into my Viking. At 20 BPS, i might get 100 balls fired in 10 seconds!