mcarterbrown.com
 

Misc Paintball Items Tanks, Barrels, Hoppers. Everything else paintball related is sold in here

Reply
 
Thread Tools Search this Thread
Old 04-16-2012, 09:05 PM   #1 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

tjd's sniper pump kit

Ok I have finished the second batch of my kit. Being first runs and and un annodized I am going to start off with a little sale I am setting the price at 70 each and that is to your door in the lower 48.

if you need a pump rod I also made 5 of them for this run. They are made of stainless steel to the specs of a CCM rod. If your buying a kit for an extra 10 I can add a rod also, but if you just need a rod so that I can cover shipping and pay pal fees I am going to have to charge 20. As always prices are to your door in the lower 48.

Prices:
Pump kit NO ARM RAW = $80
Pump kit NO ARM BLACK = $100
Pump Kit w/ arm RAW = $90
Pump Kit w/ arm BLACK = $110
Just arm = $20


Below are some pics of the final products

PUMP KITS BLACK (PRE ORDER) = 15 LEFT
PUMP KITS RAW = 3 LEFT

1. IndustrialHalo
2. super_stanchy
3. FrankW
4. maxoliv
5. Me (just got a super bolt that needs one)

PRODUCTION RUN 1:

1 alxhastngs
2
3
4
5
6
7
8
9
10
11
12
13
14 (demo kit)
Raws
15 foidpoosening
16
17
18










If your interested in the actual manufactureing process you can see most of the steps in my build thread below vvv

Sniper pump project

answers to various questions I have received

I call the main pump rod the rod that screws into the body that the pump handle rides on. the guide rod is what keeps the pump handle from twisting in my design it is directly below the main pump rod. my guide rod is larger in dia than the ccm kits the spacing is also slightly different. the pump arm is the rod that connects the pump handle to the back block this will fit ccm or any other standard pump arm

@towerofcards.19
I have not worked with enough kits to pin down a standard but the over all length of the handle from front to back is 3 1/2"

I also feel the need to qualify light


vs $30 kit


I got another question in the build thread about the oring half way up the main shaft. this is what im calling the wiper oring. if you happen to get paint or debris on the main rod when you pump you can wipe that gunk all over the pump rod and into where the action is happening. this can gum up the stroke with my wiper seal that problem should be all but eliminated.

they are in fact made for 2k+ bodys. if your marker can accept 2k+ kits from other manufactures then i am pretty sure that mine would fit also.

thought it might be a good idea to show you what the kit look like on a gun



last one is sold hopefully I will get to make some more this week end.

4/25/2012 New batch is out

I also made standard length pump rods this time around

For those of you who have asked for different kinds of kits ,karni, mini, dual pump rod. I hear you and I would like to give you want you want but remember I am a one man shop and the whole process is an extremely involved and it takes weeks to fine tune to a point that I can make a real run at it. One day hopefully sooner rather than later I will be able to make all different kinds of kits but for now I have to focus my efforts on one thing at a time so that I can deliver the product that you deserve and I feel good about.


NEW UPDATE:

I have finished the "large" production run of 18 kits. I am having 15 kits annoed dust black. the remaining 3 will be raw. When I say raw I mean just out of the machine no dust finish no polish RAW.

These are all still 2k+ kits with full length cocking rods.

For the pre orders they only need to get annodized so it will be out of my hands as to when it will be 100% complete but I expect a rather quick turn around.

Here is how I want the pre order payment to work. You will pm me that you are interested and I will put your name above when I am out of numbers (kits) I will let you know that I am no longer taking orders. I am not taking any money until the kits come in and are ready to ship. At that time I will pm you that the kit is in and we can work out payment. You pay I ship.

update 7/9/12

I got a quote and lead time for the anno of 2-3 day turn around. I will pad that number a bit and say that I would expect them by next Monday barring any major problems on their end.

PARTS ARE BACK FROM ANNO







__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."

Last edited by tjd10684; 07-28-2012 at 11:34 AM. Reason: add answers to questions section
tjd10684 is offline   Reply With Quote
Old 04-16-2012, 09:57 PM   #2 (permalink)
Paintball is my Obsession
 
pghp8ntballer's Avatar
 
Join Date: May 2011
Location: Pittsburgh, PA

I have seen these kits in person this past weekend at Three Rivers Paintball. The quality is top notch! The kit is extremely smooth with little to no play. The handle is ridiculously light and very good looking.
Oh and thanks for letting me shoot that thumper. It was an interesting experience, to say the least.
__________________
Pghp8ntballer's Feedback
pghp8ntballer is online now   Reply With Quote
Old 04-16-2012, 10:04 PM   #3 (permalink)
Seasoned Member
 
Join Date: Dec 2011
Location: Los Angeles

Are these for regular sized pumps? And do they come with pump arms?
__________________
Review/Leave Feedback Here
towerofcards.19 is offline   Reply With Quote
Old 04-17-2012, 09:56 AM   #4 (permalink)
MCB Member
 
Join Date: Apr 2006

I'll take one, just let me know where to send payment.
IndustrialHalo is offline   Reply With Quote
Old 04-17-2012, 10:32 AM   #5 (permalink)
Rec Poster
 
Join Date: Sep 2009

Interested in one, pm sent.
bishop*ru is offline   Reply With Quote
Old 04-18-2012, 11:29 AM   #6 (permalink)
Gay boy with a Gun!
 
Tyler_vanvoorthuijse's Avatar
 
Join Date: Sep 2006
Location: F L O R I D A

CCM Fan
AKA Fan
Brass N Wood Fan
PM'd u.
__________________
TWINK of 1st Canadian Paratroopers, Commonwealth International Paintball Team



Quote:
Originally Posted by Jebus View Post
Quote:
Originally Posted by Tyler_vanvoorthuijse View Post
I gave into the rainbow side long ago...
I laughed beer out of my nose upon realizing you are a gay boy with a gun with that comment. Thanks, you owe me some beer.
Feedback

Selling these:
Empire Resurrection
Custom KP3 and Brass Abomination
V2 Clone w/ Gold Bolt - Black/Urban Camo Laser
CYP Nemesis Timmy
Mag Parts!
Tyler_vanvoorthuijse is online now   Reply With Quote
Old 04-18-2012, 04:02 PM   #7 (permalink)
Amateur Pump Player!!!
 
Tater's Avatar
 
Join Date: Feb 2012
Location: Asheville NC

CCM Fan
Kilt Fan
do they fit 2k+
__________________
Tater's Feedback:+14/-0

Taters Feedback:http://www.mcarterbrown.com/forums/f...-feedback.html
Tater is offline   Reply With Quote
Old 04-18-2012, 04:18 PM   #8 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Quote:
Originally Posted by Tater View Post
do they fit 2k+
I'd say those are most certainly 2k threads. I think he said in the build thread they were 2k as well
__________________
-= MaD =-
Sheridan Seals, Valve Tools, and Parts
Feedback
DIY Paintball Stuff!

Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is online now   Reply With Quote
Old 04-18-2012, 06:30 PM   #9 (permalink)
*** pumpin' DIRTBAG ***
 
hlfblckr78's Avatar
 
Join Date: May 2009
Location: NOR-CAL

CCM Fan
Are the pump handles made of carbon fiber? If so, r u willing to sell just the handle?
__________________

hlfblckr78 is offline   Reply With Quote
Old 04-19-2012, 07:04 PM   #10 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

bump
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Reply

  mcarterbrown.com » Buy, Sell, Trade » Misc Paintball Items

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 10:04 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC