|Misc Paintball Items Tanks, Barrels, Hoppers. Everything else paintball related is sold in here|
| ||LinkBack||Thread Tools||Search this Thread|
|07-04-2012, 01:12 AM||#1 (permalink)|
BKO/B2K4 scimitar triggers
I made these a little while ago for ICDO but not all of them sold. So, lets see what happens on MCB.
These were basically made to be thicker than the stock trigger and fit better in the 2k4 frames that commonly have tons of play in them.
After measuring both my 2k4 bko and 2k4 bushmaster frames I found that the opening at the top is about .261", so I made these to allow for about .003" of play. I also found that both frames had a taper in the cavity, so I tapered the triggers about .004" from top to bottom.
It should be noted that my MI bko frame was actually about .02" heavier and that only the .240 trigger would fit it. Both my 2k4 bko frame and my 2k4 bushmaster frame fit these like a glove. I do not know if this is true of all PL guns but I do have a .240" trigger available if anyones interested.
It should also be noted that you will need to provide your own set screws. you will need:
-3x 8-32(the ones in the stock trigger work fine)
-1x 6-32(not necessary but will allow better control of travel)
Sizes: (I only have 1 of each)
Price: $25 shipped per trigger.
|Thread Tools||Search this Thread|