Buy, Sell, Trade

[Chris Mader]

READ THIS FIRST! - - - READ THIS FIRST! - - - READ THIS FIRST!

I've decided to sell the majority of my spare parts collection. I do this with a heavy heart but there are other things I'd rather have these days. I can't even remember the last time I played and these parts just sit in boxes and collect dust.

Please follow the guidelines I'm setting here. I don't have time to screw around with people. First come, first served. There is no calling 'dibs'. Either you have the money or you don't. I'm not holding anything for anyone. I mean no offense to anyone I just don't want to deal with it. No trades! Email is the best and fastest way to get in touch with me: chris@vm68.com

Postage is not included in the prices. Send me a list of what you want and your address and I will get back to you with a total. I prefer USPS priority mail.

I accept Paypal and money orders. Money orders must be received within 5 mailing days or I will put the item(s) back up for sale. Payments (Paypal or MO) MUST include a list of the items you are paying for.



New Cocker 4-way stems. Not sure of the brand. They seem to fit most 2 oring 4-ways. Two new o-rings included. I have 7. $2.50 each. -1 SOLD-



ANS Race frame. Includes one piece front block with noid, Doc's Machine Flattop front block screw (had to be modified to fit the block), charging cable (not pictured) and data cable (not pictured). The end came off the data cable and needs to be put back together. The frame was also gutted for an mQ valve. All the original parts are included. Worked great last time I used it although it's been a while. $175



Like new mQ valve for Race frames. I've hooked it up to my Race frame but it's never seen air. $100
Brass Jerry Johnson universal adapter. $20



Used Bob Long cyclone Cocker valve. I can't guarantee the integrity of the cup seal as I've never used it. $7.50



New CCM Cocker ram, black. $30



New WGP IVG. $7.50



Used stock STO(?) Cocker ram. Has a scratch that goes all the way around the cylinder. I tapped the front for 10-32 threads so it can use QEVs. $10



New Rat valve knockoff. Not sure of the exact make. $12.50



New Cocker trigger plates for 98+ slide frames. The aluminum ones are Kapp, the chrome one is WGP. $7.50 each. -GREEN SOLD-



Used Delrin pull pin for back blocks/bolts that use their pull pins vertically. $7.50



New Kapp valve jam nut with o-ring. $7.50



New Extreme Rage stainless pull pins. I have 2. $7.50 each.



Freeflow tungsten hammer with spring. $25



New blue P&P .45 slide frame. $30



New purple P&P .45 slide frame. I have 2. $30 each.



New red Kapp Reflex hinge frame. My personal favorite hinge frame. I'd have no problem not selling this. $75



Cocker threaded 14" OTP Demon Series barrel. About a .688. The J&J has been sold. $15



VM elbows for feed blocks without metal inserts. The plastic one is lightly used. $5
The factory copper elbow is new. $5



Here's a real oddball. It's a VM power feed that replaces the metal insert in the feed block. I've seen very few of these in my travels. This one appears to be in new condition. $15



Pro Team VM power feeds. These do not include detentes or detente plates. #1, 3, 4 are $30 each.
#2 needs a new plug. Pro Team should still carry them. $25 - #1 & 3 SOLD-



New Proline VM sight rail. $15



Used VM sight rail. I'm not sure of the brand but considering how beefy it is I'd guess Taso. $15



Used VM valve tools. I have another black one not pictured. $5 each



VM valves. I'll include two new o-rings with each valve. The two silver ones are stock. $15 each -ONE SOLD-

The two pewter valves are aftermarket of some sort. I don't know by who though. They only have one outlet which is the same size as the largest outlet on stock valves. $20 each



Used Venturi bolts. I'll include 3 new o-rings with each bolt. I'm pretty sure #1 and 2 are Taso. #3 is Marker. #4 with the angled port might be a Carter but I can't say for sure. $30 each - 1, 2, 3 SOLD-



Smart Parts gadget grip for Mags. Has a barrel plug in the bottom. Used in good condition. $15



New Benchmark Perfect frame for Mags. $40



Cup seal from a 2k4 Bushy. Worked great when I took it out. $5
Stock pull pin from a 2k4 Bushy. $1? If you buy something else and want it I'll throw it in for free.



Stock LPR from a 2k4 Bushy. $5



Delrin pull pin for Bushmasters. This is from that guy on eBay that sells Bushy parts. Very low miles. $5



Stock board from a 2k4 Bushy. Worked fine when I took it out to replace it with a Chaos. $5



Tippmann A5 QEV kit. Will fit all 98 Custom, Custom Pro, and A5 paintball guns with Cyclone Feeds. This kit will NOT work with RT kits. Each kit includes 1 QEV, 1 straight fitting, 1 90* fitting, 1 oring (not pictured), and 2" of black hose. All fittings are nickel plated. I have 2 new kits left then I won't be carrying them anymore. $15 each



Tippmann 68 Special o-ring kits. Kits include 1 each valve, hammer, bolt, and power tube o-rings and 2 linkage arm o-rings. These are my last 9 kits. Once they're gone I won't be putting together any more. $3 each. -5 SOLD-



Brass Eagle 50 round hopper with elbow. $2



DYE Sticky grips. $5 each



Hopper cover for Revys and VL-2000s. Can be turned inside out and is black on the reverse. $7.50



Sight rail from something. Probably from a nelson based pump. Distance between holes is 2-3/4" and appears to be for 1" tubes. $2



Another old relic. This uses a set screw for the pin depressor rather than a milled pin. $5



NW on/off drop in excellent condition. I really like these things. $15



Two black Shocktech drops. Used but in good condition. IIRC, the long one is a #5 and the shorter one is a #4. $10 each



Older Mac Dev Gladiator reg. $20

[gbw369]

Interested in these- pm me:

New AIM 15* ASA for 2k Cockers. Black, includes screw and o-ring. $15

Two black Shocktech drops. Used but in good condition. IIRC, the long one is a #5 and the shorter one is a #4. $10 each (the shorter one is the one I want)

Brass Eagle 50 round hopper with elbow. $2

New Extreme Rage roller plate and sear sets. I have 8. $7.50 each (want one of these)


PM me with a shipped price (zip: 16602)

[Tesko]

New Extreme Rage titanium IVGs. I have 2. $7.50 each
New Extreme Rage roller plate and sear sets. I have 8. $7.50 each.

Ill take one of each, toss me a PM.

[HellsGate139]

Ill take the

Old style PPS Micro Rock 25$

PM sent

[Crash]

I know this stock!!
"VM stock that replaces the rear bottom plug. Probably home made. It's made of solid 1” aluminum bar and is very sturdy. $20"
I had it built at my work years ago....solid doesn't even come close! Good luck with the sale!

[Hula Popper]

I will take Eclipse Rex Dialer kit

PMed you

[MadCat]

I'll take the VM magna port, phase 2 hammer and pro team pro shot kit

email and IM inbound

[Chris Mader]

Everybody that emailed/PMed me should have gotten a reply.

If you're interested in some please try to remember to send me your zip code. It'll make things go much faster. It's kinda hard to calculate a total without it.

[Chris Mader]

Originally Posted by Crash

I know this stock!!
"VM stock that replaces the rear bottom plug. Probably home made. It's made of solid 1” aluminum bar and is very sturdy. $20"
I had it built at my work years ago....solid doesn't even come close! Good luck with the sale!

Hehe, it's a small world. For anyone interested, it could also double as a hammer. It's a nice stock but I haven't used it in a long time. Might as well let someone else enjoy it!

[MadCat]

Paypal sent for vm magna port, phazze ii hammer and pro-shot kit.

Thanks Chris!