for sales tons of cocker ccm pump ss25 assorted bits regs etc. cheap!

Gogged_Gurl · 05-23-2008, 04:39 AM

all prices postage included,paypal prefered

i have feedback all over and am verified buisiness paypal.

i need to clear this stuff out,the old stuff is AS IS some of it works some not

i will sell the whole lot shoot me a offer,also i need a few small bits mainly a adjustable stock

first up 3 pump arms 5.00 for the lot PENDING

3 hammers not so great and then a rear ivg adjuster ans? 2.00 PENDING

Brand spanken new long cp reg 45.00 PENDING

4 pairs of grips ccm etc,the other ccms not pictured but included 4.00 SOLD

brand new speed feed gates,phantom or whatever 2.00

brand new freeflow front blocks and clamping feednecks offer up? black neck is SOLD

3 front blocks with partial pnue's,1st is unknown long palmer nickel LPR splash block (pre-99),unknown 3way,next green FF milenium with ans 3way,and long nickle lpr,3rd red splash boblong block with red ans3way

8.00,8.00,3.00? SOLD

FF valve stem cup seals brand new 2.00 for SOLD

brand new clear ccm pump handle 10.00 SOLD

mixed spring bags brand new springs assorted wieghts 2.00

cocking rods 2.00 each? SOLD

asa's shocktech is new 32 degrees is well used 5.00 PENDING

ION reg

CP brand new PM5 roller trigger 5.00

Gogged_Gurl · 05-23-2008, 05:01 AM

3 rams 5.00 ans and the other 2 ? SOLD

unkown reg 5.00 SOLD

system x hinge frame good shape 6.00 PENDING

timing rods 3.00 for the lot

2 jam nuts 2.00

bare composite WGP slider frames 3.00 each SOLD

nostayhome · 05-23-2008, 05:07 AM

I'll take the stockclass feed if you still have it. LMK

MaD · 05-23-2008, 05:20 AM

sending PM

TK702 · 05-23-2008, 06:06 AM

Is the SC feed a Phantom feed that has been modded to fit a SS25 or is that how they come from the factory? Would you know if it would work on a right hand feed Series 5 SS25?

Thanks

Gogged_Gurl · 05-23-2008, 06:09 AM

Quote:

Originally Posted by TK702

Is the SC feed a Phantom feed that has been modded to fit a SS25 or is that how they come from the factory? Would you know if it would work on a right hand feed Series 5 SS25?

Thanks

wevo modified the phantom set up to fit the top of a ss25,i dont think it could work correctly on a right feed

pm's replied to

cheers

nostayhome · 05-23-2008, 06:35 AM

PM sent requesting total. Thanks

Jamie James · 05-23-2008, 06:48 AM

PM'ing

tedaut · 05-23-2008, 08:11 AM

pm sent

destro7976 · 05-23-2008, 09:49 AM

PM'ing...

05-23-2008, 04:39 AM	#1 (permalink)
Gogged_Gurl Newbie Join Date: Jan 2007 Location: Nor Cal	for sales tons of cocker ccm pump ss25 assorted bits regs etc. cheap! all prices postage included,paypal prefered i have feedback all over and am verified buisiness paypal. i need to clear this stuff out,the old stuff is AS IS some of it works some not i will sell the whole lot shoot me a offer,also i need a few small bits mainly a adjustable stock first up 3 pump arms 5.00 for the lot PENDING 3 hammers not so great and then a rear ivg adjuster ans? 2.00 PENDING Brand spanken new long cp reg 45.00 PENDING 4 pairs of grips ccm etc,the other ccms not pictured but included 4.00 SOLD brand new speed feed gates,phantom or whatever 2.00 brand new freeflow front blocks and clamping feednecks offer up? black neck is SOLD 3 front blocks with partial pnue's,1st is unknown long palmer nickel LPR splash block (pre-99),unknown 3way,next green FF milenium with ans 3way,and long nickle lpr,3rd red splash boblong block with red ans3way 8.00,8.00,3.00? SOLD FF valve stem cup seals brand new 2.00 for SOLD brand new clear ccm pump handle 10.00 SOLD mixed spring bags brand new springs assorted wieghts 2.00 cocking rods 2.00 each? SOLD asa's shocktech is new 32 degrees is well used 5.00 PENDING ION reg CP brand new PM5 roller trigger 5.00 Last edited by Gogged_Gurl; 05-23-2008 at 07:22 PM..

05-23-2008, 05:01 AM	#2 (permalink)
Gogged_Gurl Newbie Join Date: Jan 2007 Location: Nor Cal	3 rams 5.00 ans and the other 2 ? SOLD unkown reg 5.00 SOLD system x hinge frame good shape 6.00 PENDING timing rods 3.00 for the lot 2 jam nuts 2.00 bare composite WGP slider frames 3.00 each SOLD Last edited by Gogged_Gurl; 05-23-2008 at 05:46 PM..

05-23-2008, 05:20 AM	#4 (permalink)
MaD MCB Member Join Date: Oct 2007 Location: Michigan	sending PM __________________ -= MaD =- Like DIY projects and crazy scenario gear? Visit us! www.freepaintballplans.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-23-2008, 05:07 AM	#3 (permalink)
nostayhome Newbie Join Date: Apr 2008 Location: Eastside of da "808"	I'll take the stockclass feed if you still have it. LMK

05-23-2008, 06:06 AM	#5 (permalink)
TK702 Newbie Join Date: May 2008 Location: The 661	Is the SC feed a Phantom feed that has been modded to fit a SS25 or is that how they come from the factory? Would you know if it would work on a right hand feed Series 5 SS25? Thanks

05-23-2008, 06:35 AM	#7 (permalink)
nostayhome Newbie Join Date: Apr 2008 Location: Eastside of da "808"	PM sent requesting total. Thanks

05-23-2008, 06:48 AM	#8 (permalink)
Jamie James Rec Poster Join Date: Jan 2008 Location: Burlington, Ont.	PM'ing

05-23-2008, 08:11 AM	#9 (permalink)
tedaut MCB Member Join Date: May 2006	pm sent

05-23-2008, 09:49 AM	#10 (permalink)
destro7976 MCB Member Join Date: Dec 2006 Location: Northwest PA	PM'ing...