new pump by spyder - Page 45

RAZRBAKK · 10-24-2012, 01:55 PM

I will most definitely be picking one of these up.

All I need is one of these barrel adapters and I'm right on track.

Is there any way to quickly switch between the hopper and mag(sorry if this has been discussed)? I'd like to run FSRs in the magazine and a hopper.

Murf425 · 10-24-2012, 01:56 PM

Quote:

Originally Posted by dundadun

Sc/spring fed suggestion:
If it's doable, leave enough room behind the reg paint feed for red dot or adjustable riser.

Or put a small rail on top of the breech like the dovetail on a Phantom feed.

russc · 10-24-2012, 01:59 PM

Quote:

Originally Posted by lmartin

sadly it won't come with Cocker Threads, i requested a sleeve to be researched that we could sell as an accessory. would be in the ball park of $10 - $15

if the sleeve sells well enough we would make it a permanent feature.

For what it's worth, this would probably not work very well. Most people would want to switch to autococker barrels so that they could bring their barrel bore size down. If there's an adapter between the chambered ball and the small bore barrel, that's a recipe for paint breaks.

Murf425 · 10-24-2012, 02:10 PM

Russc is right. Guess I'll just have to spend the $50 on a new Freak back.

matteekay · 10-24-2012, 02:12 PM

Unless I misunderstood, I believe Lou was saying that the sleeve will replace the current rotating breech sleeve.

Also, the barrel OD is 7/8 so I think a Freak back will probably be too tight to pump.

Murf425 · 10-24-2012, 02:16 PM

Fine...I'll just go back to my cheap roots and slap on a CP 1-piece. Anyone have an issue with that to shoot down my happiness? =P

idkfa · 10-24-2012, 02:39 PM

Quote:

Originally Posted by Murf425

Fine...I'll just go back to my cheap roots and slap on a CP 1-piece. Anyone have an issue with that to shoot down my happiness? =P

Why don't you Freak bore it?

Murf425 · 10-24-2012, 02:41 PM

Haha...I knew someone (probably you) would say that.

Lou, a guy over on PBN said:

Quote:

...there are 3 mag options 9 rd FC compatible straight mag, 10 68 cal curved mag and a 15 rd 68cal curved mag.

True story?

Grimm · 10-24-2012, 02:41 PM

Quote:

Originally Posted by lmartin

here is close up of our valve & cup seal.Attachment 35816

This I like. the spyder cupseal and springs will be nice, super cheap and easy to find for repair and tuning. and the powertube looks good and beefy like the Ranger powertubes. seems like a good combo to me

matteekay · 10-24-2012, 02:42 PM

Quote:

Originally Posted by Murf425

True story?

Yeah, they're in the PDF Lou posted.

10-24-2012, 01:55 PM	#441 (permalink)
RAZRBAKK WhatWouldAtticusFinchDo? Join Date: Dec 2007 Location: Etobicoke, Ontario, Canada	I will most definitely be picking one of these up. All I need is one of these barrel adapters and I'm right on track. Is there any way to quickly switch between the hopper and mag(sorry if this has been discussed)? I'd like to run FSRs in the magazine and a hopper. __________________ MCB Feedback Tdot Feedback

10-24-2012, 02:10 PM	#444 (permalink)
Murf425 Pop-Up Ninja Join Date: Oct 2007 Location: Brandon, FL	Russc is right. Guess I'll just have to spend the $50 on a new Freak back. __________________ My Feedback Thread Go ye therefore to all the nations, shooting them in the face with balls of paint. Proud member of Team On Target. www.teamontargetpb.com

10-24-2012, 02:12 PM	#445 (permalink)
matteekay 5 Past Hammer 7ime Join Date: Dec 2010 Location: Aliso Viejo, CA	Unless I misunderstood, I believe Lou was saying that the sleeve will replace the current rotating breech sleeve. Also, the barrel OD is 7/8 so I think a Freak back will probably be too tight to pump. __________________ Feedback

10-24-2012, 02:16 PM	#446 (permalink)
Murf425 Pop-Up Ninja Join Date: Oct 2007 Location: Brandon, FL	Fine...I'll just go back to my cheap roots and slap on a CP 1-piece. Anyone have an issue with that to shoot down my happiness? =P __________________ My Feedback Thread Go ye therefore to all the nations, shooting them in the face with balls of paint. Proud member of Team On Target. www.teamontargetpb.com