|Pump Guns Is there anything more pure than a pump gun?|
| ||Thread Tools||Search this Thread|
|09-07-2006, 01:00 AM||#1 (permalink)|
Join Date: Apr 2006
Phantom, PMI 1 FS
Time to clean the closet a bit.
I've found that phantoms are too light for me to snapshoot, so one of mine is getting sold.
It's your basic acid blue/black 45 framed VSC setup now. I will include the velocity adjuster rod, spare parts kit (bolt and puncture pin orings, cup seal, and orings for the old style hardline), left feed body, allen wrench for removing the 12 gram changer, and the 11" nickel or black barrel. It also has the matching CCI stock. The feed has been cut down from 15 rounds to 12 rounds. The ghost ring is from Punisher Customs from an early run he did - first or second.
The 45 frame will be switched to a standard CCI version before shipping. SN on the phantom is 26214 and it shows some wear because of it's age but it rarely gets used. I'm sure it's been in battle less than a dozen times.
The color is dark, but closer to this:
I'm looking for $180 obo shipped.
The PMI 1 is a direct feed model with little wear and lots of extra parts. It has an Assault Line stock with the bottle bracket, PMI rubber grips, a rear velocity adjuster, a WGP ammo box loader with scope cap, a constant air adapter, and a Fassst Changer. The speed demon bolt is non-adjustable. This is my last piece of brass that isn't Palmers, I intended to have it changed into a Paladin but other projects got my attention.
The bottle bracket is missing one thumb screw, and there is some wear under the pump handle, but the overall finish is very good.
I'm looking for $100 shipped because of all the hard to find parts.
Anyone that's made it this far, thanks for looking. If interested, please contact me by pm, posting here, or email to IndustrialHalo@hotmail.com
Payment can be via money order or paypal.
Sorry, not really looking to trade. ONLY interested in a Palmer front end for an autococker, a Palmer barrel for same, or a pre-2K CCM pump kit.
|09-07-2006, 11:28 AM||#5 (permalink)|
|09-07-2006, 10:14 PM||#8 (permalink)|
Join Date: Apr 2006
The Gringo's correct. They're not currently offered on CCM's site so I doubt they'll make one anymore. Since Jason left they're not as customer friendly with requests.
The frame is a Dye single finger hinge. It's since been swapped out with a black Dye slider filled with a shocktech plate and belsales roller sear. I like the feel of the new one much better. I've also thrown a Deadlywind barrel on it and made a few minor changes to lighten it further. The old bigshot barrel was on there because I previously considered selling it setup that way. It's now one of the guns I won't part with.
In other news the PMI 1 and Phantom are both gone as of 9/12/06.
Last edited by IndustrialHalo; 09-12-2006 at 11:34 PM.
|Thread Tools||Search this Thread|