Punishers Custom Blackhawk Prototype Phantom

weekendballer · 07-23-2008, 12:08 AM

I just bought this and it needed some work out of the box. After having everything taken care of i decided it wasn't for me. So i am just going to put it back on the market.

Ken at KPCS did all of the milling and work to it big thanks to him for the help.

The issues were
the top tube was only mounted by one screw so it was very loose and unstable, it leaked out of every fitting, the trigger frame was loose, Lots of gunk in it, Looked like i was just slapped together as soon as each part was made.

what was done
first a second mounting point was put in at the rear. the top tube now mounts into the valve body as well as near the front. Ken also countersunk and oring between the valve and the top tube to make sure there were no issues with leaks.
the hard line was bent at to sharp of an angle so it was restricting air flow so that was fixed as well as all of the holes being re tapped to clean up the threads. it just needs a 12 gram seal now as it was sent with one missing the seal.
the trigger frame was loose because the screw for it would protrude into the breech if it was fully tightened so it was shortened up.
I am sure there is a few other details that i am missing but
other than that it was completly disassembled and cleaned up and put back together.

1000$ obo now that all of the KPCS updates are done

Update These are pictures of what it looks like now Its still at KPCS

Quote:

Originally Posted by KPCS

Update ......

http://img292.imageshack.us/img292/6008/1000089ff8.jpg
http://img505.imageshack.us/img505/5300/1000090gw4.jpg
http://img75.imageshack.us/img75/8700/1000092ap8.jpg
http://img386.imageshack.us/img386/4909/1000091dv5.jpg

Ken W

SEKTape · 07-23-2008, 12:22 AM

Trades? Also, is the cup seal the only work that it needs?

weekendballer · 07-23-2008, 01:51 AM

yep only needs a 12 gram seal that's if my local store doesn't have one tomorrow. trade would need to be something very interesting.

weekendballer · 07-23-2008, 05:08 PM

well my store doesn't have seals.

A.C. Basbas · 07-23-2008, 05:10 PM

Stupid lack of money. Good luck with the sale.

weekendballer · 07-23-2008, 05:13 PM

thanks

A.C. Basbas · 07-23-2008, 05:15 PM

Quote:

Originally Posted by weekendballer

thanks

I know I'm really not a potential buyer (unless you need a guitar(s) in trade), but out of curiosity could you explain/show the feed system? It's very boxgun-y and I'm not 100% sure that I get how it works

weekendballer · 07-23-2008, 05:17 PM

I will get more pictures but the front of the top tube turns to the side so you can feed balls into the front.

Punisher's Black Hawke
rolondos thread has a good picture of it.

A.C. Basbas · 07-23-2008, 05:20 PM

Ah, that's exactly what I was wondering about. Very cool idea! I like it better than standard phantom feeds or stick-feeds... Now, does that second barrel line up with the end of the top tube?

weekendballer · 07-23-2008, 05:24 PM

both barrels are the same length one is just drilled for inserts.

07-23-2008, 12:22 AM	#2 (permalink)
SEKTape Active Member Join Date: Jan 2007 Posts: 229	Trades? Also, is the cup seal the only work that it needs? __________________ "Arrogance on the part of the meritorious is even more offensive to us than the arrogance of those without merit: for merit itself is offensive." -Friedrch Nietzsche "To love is to protect. To protect is to never betray." -Brandon Heat

07-23-2008, 01:51 AM	#3 (permalink)
weekendballer MCB Member Join Date: Mar 2007 Location: Detroit MI Posts: 1,174	yep only needs a 12 gram seal that's if my local store doesn't have one tomorrow. trade would need to be something very interesting. __________________ FEEDBACK Parts for everything, MKX Launcher Last edited by weekendballer; 07-25-2008 at 02:39 PM.

07-23-2008, 05:08 PM	#4 (permalink)
weekendballer MCB Member Join Date: Mar 2007 Location: Detroit MI Posts: 1,174	well my store doesn't have seals. __________________ FEEDBACK Parts for everything, MKX Launcher Last edited by weekendballer; 07-25-2008 at 02:40 PM.

07-23-2008, 05:10 PM	#5 (permalink)
A.C. Basbas Post Whore Join Date: Feb 2007 Location: Maynard, Massachusetts. Posts: 2,428	Stupid lack of money. Good luck with the sale. __________________ -Dragon Brigade- wWw #32 My WTB Thread ~ Eclipse Mag F/S/T MCB Feedback ~ PbN FeedBack

07-23-2008, 05:13 PM	#6 (permalink)
weekendballer MCB Member Join Date: Mar 2007 Location: Detroit MI Posts: 1,174	thanks __________________ FEEDBACK Parts for everything, MKX Launcher

07-23-2008, 05:17 PM	#8 (permalink)
weekendballer MCB Member Join Date: Mar 2007 Location: Detroit MI Posts: 1,174	I will get more pictures but the front of the top tube turns to the side so you can feed balls into the front. Punisher's Black Hawke rolondos thread has a good picture of it. __________________ FEEDBACK Parts for everything, MKX Launcher

07-23-2008, 05:20 PM	#9 (permalink)
A.C. Basbas Post Whore Join Date: Feb 2007 Location: Maynard, Massachusetts. Posts: 2,428	Ah, that's exactly what I was wondering about. Very cool idea! I like it better than standard phantom feeds or stick-feeds... Now, does that second barrel line up with the end of the top tube? __________________ -Dragon Brigade- wWw #32 My WTB Thread ~ Eclipse Mag F/S/T MCB Feedback ~ PbN FeedBack

07-23-2008, 05:24 PM	#10 (permalink)
weekendballer MCB Member Join Date: Mar 2007 Location: Detroit MI Posts: 1,174	both barrels are the same length one is just drilled for inserts. __________________ FEEDBACK Parts for everything, MKX Launcher

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search