![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
|
![]() |
| | LinkBack | Thread Tools | Search this Thread |
| | #1 (permalink) |
| Seasoned Member Join Date: Jan 2010 | Getting an Azodin limited edition Pump
I'm getting an Azodin Limited Edition Pump. My first pump. Anything I should know? Is it Cocker threaded? Want to use my furious lotus barrel.
__________________ I rock an Automag, 'cause Automags rock. |
| | |
| | #2 (permalink) |
| Radical! Join Date: Nov 2009 Location: NishNash |
Yep, cocker-threaded. What's the smallest bore you have for the Lotus? You want the bore to be pretty tight to prevent roll-outs. Feedneck is impulse-threaded, in case you end up not liking the twist-to-lock function of the stock one. I dunno what else you really need to know, just have fun with it.
__________________ |
| | |
| | #4 (permalink) |
| Radical! Join Date: Nov 2009 Location: NishNash |
The detents only prevents double-feeds, won't prevent roll-outs since it's closed-bolt like autocockers (and most other pumps). So the barrel's bore holds the ball in place. The stock barrel has a "triad" system, which is simply an o-ring stretched over 3 open slots on the back of the barrel. Sides of the o-ring protrude into the barrel bore, acting as roll-out prevention. May want to use the stock barrel unless you can get paint that's .685 or larger, or get a smaller bore barrel.
__________________ |
| | |
| | #5 (permalink) | |
| Seasoned Member Join Date: Jan 2010 | Quote:
__________________ I rock an Automag, 'cause Automags rock. | |
| | |
| | #10 (permalink) |
| Radical! Join Date: Nov 2009 Location: NishNash | Per the manual, velocity adjustments are made in the back of the Kaos Pump. But the limited edition version comes with an inline reg. So Kermit is saying to set the velocity knob/screw, then make pressure adjustments with the reg, which will also affect velocity.
__________________ |
| | |
![]() |
|
| Thread Tools | Search this Thread |
|
|