Paintball

[CJOttawa]

Originally Posted by infamoussmiley

Would this work with 007s?

Smiley

I'm guessing it would - which means there's a market for them.

The valve nut and internal valve dimensions might require the insert to be trimmed but otherwise, same same.

[sniper42]

I have successfully made these for a nelspot out of .5 OD copper tubing and they work quite well.

[russc]

What shape did you use?

[idkfa]

Who wants me make me one?

Since moving out and leaving most of my tools behind, I especially have no way of making this.

[sniper42]

I filed mine on the bottom and bent it ever so slightly out of shape so that the liquid could have a place to flow, then drilled holes in the back part of it so it can flow into the inside and out the power tube. I was having velocity issues but I think that is due to the stock internals and not bored out stock powertube.

[russc]

yeah, the stock powertube is junk.

[PB Weasel]

Yup mine snapped very quickly. Cut down lapco 6 is thr bomb though.

[sniper42]

I plan on boring mine out on the lathe. I broke my first one trying to bore it out. The holes are not always centered on the stock tubes, so I ended up going through the sidewall on a thin spot. I really ought to just buy a lapco.

[short304]

EDIT: Thanks CJ for showing me how to subscribe to a thread the right way