pgp pressure nightmare... - Page 2

Jackalkat · 06-26-2007, 12:58 AM

Ok I think I solved my problem... It turns out that depending on which PGP you have the hammer has a slightly different depth for the spring to sit in. Only a handful of markers were produced with this oddity. I solved the problem with a few (8) washers small enough to rest inside the depression of the hammer. so far so good. I can get 280 fps with the allen set screw in the middle of the RVA

thanks for all your help guys... I only found this out form a guy who used to service Sheridan products in the late 80's early 90's.

I really appreciate this website! Thanks so much!

Jackal

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-26-2007, 12:58 AM	#11 (permalink)
Jackalkat Newbie Join Date: Jun 2007 Location: Lynn Massachusetts	Ok I think I solved my problem... It turns out that depending on which PGP you have the hammer has a slightly different depth for the spring to sit in. Only a handful of markers were produced with this oddity. I solved the problem with a few (8) washers small enough to rest inside the depression of the hammer. so far so good. I can get 280 fps with the allen set screw in the middle of the RVA thanks for all your help guys... I only found this out form a guy who used to service Sheridan products in the late 80's early 90's. I really appreciate this website! Thanks so much! Jackal