| ||Thread Tools||Search this Thread|
|09-19-2011, 08:55 PM||#1 (permalink)|
Man in Tights
Join Date: Mar 2011
Location: St. Albert, AB
PGP Back Hammer Cap
I bought a PGP earlier this year, but all this time it's had one small issue: the endcap behind the hammer is a tad loose, which makes it that much harder to cock all the way. Essentially, the back screw through the gripframe threads right into the cap, but the hole through the gripframe itself has worn itself a little too large for the screw. Thus, the cap sticks out a bit from the back, particularly with the spring inside pushing against it.
How do you think I could best remedy this issue?
|09-20-2011, 01:44 PM||#3 (permalink)|
Join Date: Jun 2008
Location: looking through the knotholes in granny's wooden leg
replace the grip frame. they are cheap, especaliy if you find one gutless and swap yours over.
4 out of 5 voices in my head say i'm ok
Stuff I want or need evenually
want to buy red pump handle
Nelson, Tippmann, Dye, Angle, Spyder stuff
|Thread Tools||Search this Thread|