PMI-II LB help - Page 2

angrysasquatch · 11-06-2006, 10:29 PM

Alright, thanks alot on that. I guess that rules out PPS.

bacci paintball · 11-06-2006, 10:39 PM

I had that sheridan a few owners back and I don't think the asa was drilled for a rva. The number on top was probably from being a rental at one time. The nickel work and the quick strip slot were nicely done though and it was a nice smooth shooter.
It didn't have any valve work done.
Edit: Also I believe it was a cut down sheridan lb. The barrel was professionally shortened though before it was plated.
-Dan

angrysasquatch · 11-08-2006, 09:26 PM

Were you the one who had the work done to it? If so, who did it, if you don't mind me asking?

Either way, thanks for tthe info.

bacci paintball · 11-12-2006, 04:54 PM

I bought a pair of them and they already had the work done to them.
-Dan

Wharf Rat · 11-13-2006, 04:37 PM

I agree with Dan, it looks like a Piranha LB - it would have "PMI II" on the left side of the barrel (unless it was cut off) if it was that model. Even more significant is the "no toe" grip frame - I don't think the PMI II had one. Of course, it could have been changed.

P

11-13-2006, 04:37 PM	#15 (permalink)
Wharf Rat Galactic Overlord Join Date: Apr 2006 Posts: 378	I agree with Dan, it looks like a Piranha LB - it would have "PMI II" on the left side of the barrel (unless it was cut off) if it was that model. Even more significant is the "no toe" grip frame - I don't think the PMI II had one. Of course, it could have been changed. P __________________ Scourge of the Spaceways

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-06-2006, 10:29 PM	#11 (permalink)
angrysasquatch Newbie Join Date: Oct 2006 Posts: 29	Alright, thanks alot on that. I guess that rules out PPS.

11-06-2006, 10:39 PM	#12 (permalink)
bacci paintball MCB Member Join Date: Mar 2006 Location: Nor Cal Posts: 2,022	I had that sheridan a few owners back and I don't think the asa was drilled for a rva. The number on top was probably from being a rental at one time. The nickel work and the quick strip slot were nicely done though and it was a nice smooth shooter. It didn't have any valve work done. Edit: Also I believe it was a cut down sheridan lb. The barrel was professionally shortened though before it was plated. -Dan

11-08-2006, 09:26 PM	#13 (permalink)
angrysasquatch Newbie Join Date: Oct 2006 Posts: 29	Were you the one who had the work done to it? If so, who did it, if you don't mind me asking? Either way, thanks for tthe info.

11-12-2006, 04:54 PM	#14 (permalink)
bacci paintball MCB Member Join Date: Mar 2006 Location: Nor Cal Posts: 2,022	I bought a pair of them and they already had the work done to them. -Dan