Custom

[areo]

Originally Posted by super_stanchy

woohooo



lol?

Ya I'm silly I was going to ask about boring a dye carbon but then saw the answer

[super_stanchy]

Originally Posted by areo

Ya I'm silly I was going to ask about boring a dye carbon but then saw the answer

haha gotcha

the real problem with it, is the stainless core and cf are unknown thicknesses

if i freak it, and hit the cf, it could fray and break
if i bore it and it gets hot, the cf might melt/warp
if i bore it and my insert chips, im out $100
if i bore it and the barrel breaks, your out $100

too many variables, plus the fact that its stainless...

[areo]

No worries mate. If you bore a ul back can you mill some a Windows in it to lighten it up a bit

[super_stanchy]

Originally Posted by areo

No worries mate. If you bore a ul back can you mill some a Windows in it to lighten it up a bit

yup

im headin to the shop right now (last message im postin)

gonna freak bore a tactical kaner, then mill 18 windows in it

[areo]

Mm message me how much extra it would be for the windows

[super_stanchy]

update

2 freak bores done
3 to go!

[tlane77]

What is the minimum diameter barrel you need to be able to bore it?

Do you need at least a .691 for example?

Local shop is having an overstock sale and may grab a UL to bore.

[super_stanchy]

Originally Posted by tlane77

What is the minimum diameter barrel you need to be able to bore it?

Do you need at least a .691 for example?

Local shop is having an overstock sale and may grab a UL to bore.

i can bore anysize

but you will get a greater range of inserts if you have a larger stock bore

you cant use an insert larger than the existing bore

[tlane77]

So try to get the biggest bore to maximize my insert options.

[super_stanchy]

Originally Posted by tlane77

So try to get the biggest bore to maximize my insert options.

yup