Tiberius O-ring sizes

[MOOSE] · 11-08-2011, 08:06 PM

I have searched every where but can't find the size for the 12 gram sealing o-ring on the magazine. The one that does the sealing when you take it out of the marker. If there is a chart that would be helpful too.

[MOOSE] · 11-11-2011, 07:22 PM

Not the face seal that seals the 12ie the one that seals it when you take it out of the marker.

Echo · 11-11-2011, 11:23 PM

I believe it's a #8 o-ring. I've got a hundred (literally) of them, I'll make sure it is in fact number 8 in the mowning. PM me if I forget and don't put them up by noonish tomorrow.

[MOOSE] · 11-12-2011, 01:49 AM

Right on thank you.

Echo · 11-13-2011, 01:41 PM

Ok, here's the guts on your check valve. Left is towards the gun input, right is toward the 12 gram. The ring on the brass poppet (left) is a size three. I measured just by direct comparison, so the dimensions might be slightly off but it should work. I'm not sure what the large black one is, I didn't have my calipers on me at the time and I'm back at school now, so I wont be able to tell for certain until next weekend. Hopefully someone beats me to it before then.

[MOOSE] · 11-24-2011, 01:40 PM

Hmmm its bigger than the #6 one that seals the mag to the gun. Its right below that one. I think its that bigger one in the pic.

Echo · 11-24-2011, 06:38 PM

I don't know the specs on that one. I'll have to take the calipers to one when I get the chance.

Echo · 11-25-2011, 12:52 PM

Got the size of that larger ring. It's 1/16" thickness by 3/8" OD. McMaster Carr lists that as a size #010.

LT. · 11-29-2011, 06:42 PM

OK guys do we have enough info to get a list going yet?? I need to get rebuilds for mags I might be picking up.

Echo · 11-29-2011, 07:04 PM

20 MAGS!?!

Wow. Lucky for you McMaster sells rings in packs of 100. As far as I can remember you only have three, the mag to nipple seal (#6), brass poppet (#3, by comparison with another #3, not direct measurement), and the one that seals the two halves of the brass check valves (#10). I use Buna-N rings in just about everything, but this may need Urethane or Viton, someone is going to have to experiment with that. I can say for sure dont get Viton for the #6 ring, they get shredded very quickly.

11-08-2011, 08:06 PM	#1 (permalink)
[MOOSE] BAZINGA PUNK!!! Join Date: Nov 2009 Location: Elko, NV	Tiberius O-ring sizes I have searched every where but can't find the size for the 12 gram sealing o-ring on the magazine. The one that does the sealing when you take it out of the marker. If there is a chart that would be helpful too. __________________ By 2012 we thought we would have flying cars, all we have is blankets with sleeves. You don't seem to understand, BRO. It's a Shotgun, that shoots Rockets, BRO!!!!!! Feedback Extra Gear Sale Long distance member of: Team Long Stroke (It's like a long distance relationship only better)

11-11-2011, 07:22 PM	#2 (permalink)
[MOOSE] BAZINGA PUNK!!! Join Date: Nov 2009 Location: Elko, NV	Not the face seal that seals the 12ie the one that seals it when you take it out of the marker. __________________ By 2012 we thought we would have flying cars, all we have is blankets with sleeves. You don't seem to understand, BRO. It's a Shotgun, that shoots Rockets, BRO!!!!!! Feedback Extra Gear Sale Long distance member of: Team Long Stroke (It's like a long distance relationship only better)

11-11-2011, 11:23 PM	#3 (permalink)
Echo Mill Monkey Join Date: Jan 2009 Location: Orange County, California	I believe it's a #8 o-ring. I've got a hundred (literally) of them, I'll make sure it is in fact number 8 in the mowning. PM me if I forget and don't put them up by noonish tomorrow. __________________ Anonymous Assassins Paintball TeamJust look for the pink shirts MCB Feedback SpecOps Feedback Laws of Thermodynamics; 1) You cannot win, you can only break even. 2) You cannot break even.

11-12-2011, 01:49 AM	#4 (permalink)
[MOOSE] BAZINGA PUNK!!! Join Date: Nov 2009 Location: Elko, NV	Right on thank you. __________________ By 2012 we thought we would have flying cars, all we have is blankets with sleeves. You don't seem to understand, BRO. It's a Shotgun, that shoots Rockets, BRO!!!!!! Feedback Extra Gear Sale Long distance member of: Team Long Stroke (It's like a long distance relationship only better)

11-13-2011, 01:41 PM	#5 (permalink)
Echo Mill Monkey Join Date: Jan 2009 Location: Orange County, California	Ok, here's the guts on your check valve. Left is towards the gun input, right is toward the 12 gram. The ring on the brass poppet (left) is a size three. I measured just by direct comparison, so the dimensions might be slightly off but it should work. I'm not sure what the large black one is, I didn't have my calipers on me at the time and I'm back at school now, so I wont be able to tell for certain until next weekend. Hopefully someone beats me to it before then. __________________ Anonymous Assassins Paintball TeamJust look for the pink shirts MCB Feedback SpecOps Feedback Laws of Thermodynamics; 1) You cannot win, you can only break even. 2) You cannot break even.

11-24-2011, 01:40 PM	#6 (permalink)
[MOOSE] BAZINGA PUNK!!! Join Date: Nov 2009 Location: Elko, NV	Hmmm its bigger than the #6 one that seals the mag to the gun. Its right below that one. I think its that bigger one in the pic. __________________ By 2012 we thought we would have flying cars, all we have is blankets with sleeves. You don't seem to understand, BRO. It's a Shotgun, that shoots Rockets, BRO!!!!!! Feedback Extra Gear Sale Long distance member of: Team Long Stroke (It's like a long distance relationship only better)

11-24-2011, 06:38 PM	#7 (permalink)
Echo Mill Monkey Join Date: Jan 2009 Location: Orange County, California	I don't know the specs on that one. I'll have to take the calipers to one when I get the chance. __________________ Anonymous Assassins Paintball TeamJust look for the pink shirts MCB Feedback SpecOps Feedback Laws of Thermodynamics; 1) You cannot win, you can only break even. 2) You cannot break even.

11-25-2011, 12:52 PM	#8 (permalink)
Echo Mill Monkey Join Date: Jan 2009 Location: Orange County, California	Got the size of that larger ring. It's 1/16" thickness by 3/8" OD. McMaster Carr lists that as a size #010. __________________ Anonymous Assassins Paintball TeamJust look for the pink shirts MCB Feedback SpecOps Feedback Laws of Thermodynamics; 1) You cannot win, you can only break even. 2) You cannot break even.

11-29-2011, 06:42 PM	#9 (permalink)
LT. MCB Member Join Date: Feb 2009 Location: Depths,Of Hell	OK guys do we have enough info to get a list going yet?? I need to get rebuilds for mags I might be picking up. __________________ Owner of Operator Tactical Gear LLC... Contact... Kevin@operatortacticalgear.com Last edited by LT.; 12-03-2011 at 11:07 AM.

11-29-2011, 07:04 PM	#10 (permalink)
Echo Mill Monkey Join Date: Jan 2009 Location: Orange County, California	20 MAGS!?! Wow. Lucky for you McMaster sells rings in packs of 100. As far as I can remember you only have three, the mag to nipple seal (#6), brass poppet (#3, by comparison with another #3, not direct measurement), and the one that seals the two halves of the brass check valves (#10). I use Buna-N rings in just about everything, but this may need Urethane or Viton, someone is going to have to experiment with that. I can say for sure dont get Viton for the #6 ring, they get shredded very quickly. __________________ Anonymous Assassins Paintball TeamJust look for the pink shirts MCB Feedback SpecOps Feedback Laws of Thermodynamics; 1) You cannot win, you can only break even. 2) You cannot break even.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search