| ||Thread Tools||Search this Thread|
|11-20-2011, 07:51 PM||#3 (permalink)|
To the Space Olympics!
Join Date: Jun 2007
Location: Belmont NH
here is another horizontal Idea
About as subtle as a flying brick
|11-20-2011, 10:40 PM||#5 (permalink)|
(V) (o,,,o) (V) WOOP WOOP
Join Date: Apr 2007
Location: Springfield, MO
Your best bet would most likely be a vertical ASA and one of those Palmers 90 degree ASA things. I forget though, do these still have the flex valve or were theses the newer style of valve? If they are the newer type you might be able to screw a 1/8NTP extender into the valve and install a 90 degree fitting on that, then run a minicocker ASA off that, and just screw the reg into the ASA.
If it takes a lot more than rage and muscle, you clearly are not using enough of either.
This is the tenth line of my signature
|11-21-2011, 12:36 AM||#6 (permalink)|
Mind Your Manners
Join Date: May 2010
Location: Tampa Bay
The challenge is what to do with the airline that forms the trigger guard. I know somebody is thinking "Use a Pro-Carb trigger frame," but I don't want to do that.
|11-21-2011, 09:00 AM||#7 (permalink)|
Join Date: Nov 2011
Location: Kansas-Flint hills
Your should be able to reroute the airline from the reg to the asa with out losing the functionality of the hose as the trigger guard. Assuming your output line on the reg is near the trigger and not at the other end.
|Thread Tools||Search this Thread|