-   Tippmann (
-   -   98 Custom Pro ASA Issues (

Do Little 06-03-2013 03:50 AM

98 Custom Pro ASA Issues
So I decided to change out the asa on my 98 Custom Pro, and I discovered that for some reason Tippmann decided to make the entire bottomline setup non-standard. So basically I can't replace my airline because it has a custom hookup to the valve, and a custom hookup to the asa that doesn't work with standard asa's. Yay for them making stuff difficult. So anyways, is there any adapter out there or some way to get around this and use another asa?

bob_wuzza 06-06-2013 12:38 AM

(Pics are always helpful)
You're talking about the one with the square Nut held in the body, correct?
Even if it isn't solutions are most likely :

-Get a different valve with the 1/8" NPT, Your ASA of choice, and either macro fittings or hard line with 1/8" NPT ends

- Find a Braided hose with 1/8" NPT end and the other the Tippmann proprietary
( I'm pretty sure they made these at one point )

- Find out Exactly what threading It is and just find an adapter or They may make Hardline ends like this.

Your best bet is probably the first

Frizzle Fry 06-06-2013 01:03 AM

When did Tippmann move away from 1/8npt?

That's sad - standard parts (and being build like a rock) always set them apart from Kingman.

Do Little 06-06-2013 03:55 AM

I think I'm just going to make a makeshift rail and move the asa forward. I think I can get 3-4 inches before the tank hits the frame, probably more if I put some bends in it.

cwest1977 06-06-2013 04:59 AM

There are adapters you can buy. The new line kinda sucks but, it takes away the need for the valve screws in the right side of the gun. I had to buy the parts I needed from

All times are GMT -4. The time now is 03:26 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC