mcarterbrown.com  

TJD Customs TJD Customs

Reply
 
Thread Tools Search this Thread
Old 02-29-2012, 09:12 PM   #1 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

Cocker to Ego feed neck mod (service offered)

Hello I have been told on my other thread I should offer this as a service so to make a couple extra bucks (and pay for the machine) I have decided to take on a couple of these for some extra money. You can see the entire process in my thread in the custom section

Cocker to Ego feedneck mod done right

I have gotten a lot of questions as to what bodies this will work with. Unfortunately I am not an expert on cockers so i cant tell you exactly but if you have a pressed in neck similar to the one in the video I am confident that this mod will work for you. If you have a threaded feedneck such as an 05 prostock I am confident that this mod will work. These are the two body styles of auto cocker that I own so I can verify the dimensions accurately. If we are both still unsure after discussing it in pm's you can send it to me I will measure it and if it will work I can just make the mod. If for some reason i do not think it will work I will pack it back up and send it back no charge.

I have also gotten a lot of questions of what kinds of ego feed neck this will work with. I bought and measured a CP feed neck that should be good for 07-11 egos. This is the socket that i measured so this mod should work with necks that fit 07-11 egos. If you have another year feed neck that you want (say 06) you can send it along with the body I will measure the socket and measure your existing neck to make sure that I can successfully modify it to fit. If this is not the case I will let you know and we can either work something out (maybe a different year or something) and if not I will package it and the neck up and send it back no charge.

I am looking to only take on maybe 2 of these modifications per week to make sure I do not get overwhelmed. This being the case I would expect most guns to be modified the same day the get to me and back in the mail the next day. If something comes up and it will be longer I will let you know.

Given the turn around time shipping and PP fees I am looking to charge $40(see below for pricing update) per body, that includes PP fees and return shipping. If you need multiple bodies done I am willing to relax the cost per unit since i will be able to consolidate shipping costs and PP fees.

Also since I would like to promote my work and ease some minds, I am willing to do the work and ship it back before you pay. I know I am taking a risk doing this and if this were PBN I would not consider it but I think most everyone here is pretty trust worthy.

So if your interested please PM me. If you have any questions that I have not answered please post them here and I will try to answer them to the best of my ability.

Thanks everyone
-Tom

Update:

Current list of feedneck options.

Adapting options
05 Ego
06 Ego
07 Ego / Geo
Empire

This next part is kinda hard to explain in 1-2 words.

CCM clamping ring mod for ANS type necks
CCM clamping ring mod for WGP stock threaded stove pipe
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."

Last edited by tjd10684; 05-13-2014 at 10:43 PM. Reason: Update 5/13/2014
tjd10684 is offline   Reply With Quote
Old 03-02-2012, 08:07 PM   #2 (permalink)
Post Whore
 
Join Date: Jul 2007
Location: louisville ky --502---

I'm interested in this pls pm me
splashkitsrock420 is offline   Reply With Quote
Old 06-27-2012, 05:18 PM   #3 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

I am updating the pricing on ego neck mods.

new price is $30 includes shipping to lower 48 international up for negotiation.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 09-11-2012, 10:23 PM   #4 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

While I am spending a lot more time boring barrels lately I am still accepting feed neck mod work.



On this marker I also slotted the trigger rod hole on the ASA so if you need something simple like that done I can do that also.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 09-17-2012, 08:25 PM   #5 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

Ok I have a new cocker feedneck mod to offer.

If you dont want to buy an ego neck and have the body modified this might be for you.





This mod requires that the original feedneck be the threaded type and it should be unmodified prior to this. It would also require the extra purchase of a CCM clamp ring.

I will can offer this service for the same price as my Ego mod $30

any question feel free to ask.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 10-24-2012, 08:45 PM   #6 (permalink)
Semper Paratus
 
ColonelYun's Avatar
 
Join Date: Jul 2010
Location: Marthas Vineyard

CCM Fan
Palmers Fan
hey TJD, y0da just sent me over here. I'm thinking about doing a conversion to a clamped feed neck instead of the old school long feed neck. do you just do ego feed necks? I have an extra macdev feed neck I would like to utilize that feed neck if possible. thanks!
ColonelYun is offline   Reply With Quote
Old 10-25-2012, 02:05 PM   #7 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

I am not sure exactly what would be involved but if you send it down I am sure I can come up with something you will like. PM Me for more info
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote
Old 10-29-2012, 01:25 AM   #8 (permalink)
Semper Paratus
 
ColonelYun's Avatar
 
Join Date: Jul 2010
Location: Marthas Vineyard

CCM Fan
Palmers Fan
I wish this thing would update me when you reply! sending PM.
ColonelYun is offline   Reply With Quote
Old 10-31-2012, 11:49 AM   #9 (permalink)
Rec Poster
 
mobomelter's Avatar
 
Join Date: May 2012

I just sent you a PM.
__________________
My Feedback
mobomelter is offline   Reply With Quote
Old 12-19-2012, 08:18 PM   #10 (permalink)
Pump Addict
 
Join Date: Nov 2012

CCM Fan
Pmd
Zodast is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Airsmiths on MCB » TJD Customs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:30 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC