|VM Empire Where the VM-68's and PMI-3 Come out to play|
| ||Thread Tools||Search this Thread|
|05-19-2014, 10:55 AM||#2 (permalink)|
Join Date: Jul 2013
2. Depends (see below).
I have one, but I haven't seen any tangible evidence of actual improvement over the stock feed block. I have always been critical of how poorly the balls line up in this "powerfeed". There is no way it functions in the same way as the Automag powerfeed as made by Airgun Designs. All the VM pro-feed really does is vent away excess blowback. If you are running the stock bolt that isn't a problem IMO. Maybe it will make a difference if you are using a bolt without front o-rings.
Its biggest advantage is that it lets you use a standard elbow, and that it centers the hopper over the gun. If you are one of those that likes to aim down the barrel, you are going to hate it, because it obstructs the view (the stock feedblock does this too, but sits lower directly over the top of the gun). If you like to aim down the side of the marker, it will make little difference.
Areas of special interest:
|:| Sheridan VM-68 |:| Sterling |:| Planet Eclipse |:|
Last edited by Mugged2Much; 05-19-2014 at 11:02 AM.
|Thread Tools||Search this Thread|