mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   WDP (http://www.mcarterbrown.com/forums/wdp/)
-   -   help whit lcd (http://www.mcarterbrown.com/forums/wdp/222885-help-whit-lcd.html)

simenaa 01-07-2013 02:47 PM

help whit lcd
 
got this angel lcd yesterday, it had been in a basement for several years and looks kinda water damaged. clead most off it, and need some help take it apart. tried the manual but i dont realy help
http://imageshack.us/a/img89/2383/1012527.th.jpg
http://imageshack.us/a/img703/7551/1012528.th.jpg
what year and model it is?
how do i get out the hammer and valve?
as i understand i need a M3 screw to get the lpr out, is it just pull it out?
and looks like the breech rod are rusted stuck and the knob are snapped off, any idea i can get it out?
http://imageshack.us/a/img7/5061/1012529s.th.jpg

jptheripper 01-07-2013 05:38 PM

it comes out the other side

take the plug out, then you can either push it from the back with a squeege, or you have to thread a m2.5 screw into the plunger and pull, and then use a pick to gently pull it out.

Make sure the retaining pins are removed from the bottom.

And its a 2002 Fly LCD. Other than that one whammy looks in pretty good shape.

simenaa 01-08-2013 11:16 AM

thanks, how do i get the plug out?

simenaa 01-08-2013 02:45 PM

got them out, was just a bit stuck
i was basically taken apart when i got it, and screw and someother parts come in a bag, with a mystery bit. what is it? 17mm in diameter
http://img23.imageshack.us/img23/6576/utennavnmh.jpg

howdy 01-08-2013 07:15 PM

That's the piece that goes behind the bolt on the main body to plug up the solenoid area


All times are GMT -4. The time now is 09:07 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC