Registered: April 2006 Location: Uppsala, Kingdom of Sweden Posts: 392
Closeup of the hammer. Here you can see the flat area I made "blindfolded". My plans were missing the depth from the top down to the flat area. I "guesstimated" it to be close to 2mm. Well... that is what it is now. And it's kind of etched in stainless steel now, so to speak. If it turns out to be too much, I will have to make another one later on. Again thanks to BretG who filled me in on the missing measurements.
· Date: Thu May 28, 2009 · Views: 377 · Filesize: 44.2kb, 270.8kb · Dimensions: 1280 x 960 ·