View Single Post
Old 12-09-2011, 01:35 AM   #1 (permalink)
The Millrat
O'Lane's Avatar
Join Date: Feb 2007

Fixing those Flimsy Stocks (Havoc Launcher)

So 4G010H3R0 and myself started talking about how to adapt an A5 back plate to a havoc launcher in order to improve on the stock design of the Havoc launcher, and after some PM's and photos, this is what we came up with. A quick summary of the details are aluminum construction, drilled and tapped for a scope mount and instead of the standard A5 push pins, we used 10-24 shoulder bolts that really hold the stock in tight (approx. 0.005" forward offset so inserting the bolts pull the stock forward and tight against the back of the launcher). So without further ado, here's some photos courtesy of 4G010H3R0. Enjoy....

As for plans for these in the future... you'll just have to wait and see. And a thanks to 4G010H3R0, it was a pleasure working with him.

Custom Parts Machining... Feel Free to Contact
"All that is necessary for evil to succeed is for good men to do nothing"
God Bless America
O'Lane is offline   Reply With Quote