View Single Post
Old 09-13-2012, 03:05 AM   #23 (permalink)
Active Member
Malafanango's Avatar
Join Date: Aug 2011

Brass and Wood Fan
I found that the orings on my tpc kept getting shredded as I had not backed out the nylon set screw so it was catching on it. If you have a oring on the tpc I think the set screw is not needed anymore so I would trying backing it out till it was flush with the bottom of the threads.

MCB Feedback

Last edited by Malafanango; 09-19-2012 at 03:15 AM.
Malafanango is offline   Reply With Quote