View Single Post
Old 01-13-2016, 02:59 PM   #4 (permalink)
WoodsBaller57's Avatar
Join Date: Mar 2010
Location: Lincoln IL - in the middle of Illinois.

I recently had the same problem with my 6.5. Sometimes I had to pull so hard that my finger almost hurt from pulling the trigger.
After Disassembly of the frame and removal of the trigger, I found the sides of the trigger, inside the frame to be "slightly gummed up" with old paint residue. A little solvent and a toothbrush helped to some extent, then a light wet-sanding with 1500 grit sand paper made it good as new. Smooth Trigger Pull and auto triggers like a dream.
I gleaned the info above from watching some of the videos mentioned above by CCMachinist. TF does a Fine Job of explaining almost anything about a CCM Marker.
Good Luck!
Now I am just waiting for CCM to get my new Aluminum Trigger to Anno, to be made into a beautiful Dust Red.
WoodsBaller57...Playin' Pump with my New CCM J2 - Prototype #04!

I Love My J2 >>>

I TRUELY DESPISE what "Photobucket' has done to the forums.
They are Financially GOUGING individuals who have used the service for years or Killing Pictures and in doing so, Ruining the continuity of the forum.

See My Feedback

Last edited by WoodsBaller57; 01-13-2016 at 05:03 PM.
WoodsBaller57 is offline   Reply With Quote