View Single Post
Old 12-27-2018, 10:10 PM   #7 (permalink)
conpeez9
Newbie
 
Join Date: May 2012

Quote:
Originally Posted by dano_____ View Post
The bolt won't spring forward unless you have a pump return spring on the pump arm installed. You won't need to tear it apart to see that. Phantoms aren't too hard on paint if you have them setup for it. If you're running the open face tpc then you will want to have the air regulated to run brittle paint. The ported one tends to be better for unregulated co2. Be sure to be quick when cocking the gun. If you're not running an aspiring body or one with a detent you can get double feeding if you pump slowly.
It springs forward when itís degassed. However as soon as I air it up, the pump doesnít return when pumping it.
conpeez9 is offline   Reply With Quote