View Single Post
Old 08-18-2019, 07:06 AM   #19 (permalink)
I'm Comin' To Getcha!
Chaos's Avatar
Join Date: Mar 2006
Location: Clinton,MA

Fan of EMR
Even though there's no pictures these mods are pretty easy. what I did to mine if you grind the tip of the sear where it catches the bolt you can make for an easier trigger release. What do you need to do is grind it so that it's not a 90 degree angle anymore and make it so that it's just slightly less of an angle that way when you pull the trigger it will release a lot easier I'll try to get some pictures up of what I did to mine.I've done it on all the Nelsons I've had since I own my last Phantom it works very well. Just don't grind it too much or the seer won't catch or will release on its own. Currently on my Hammer the trigger is so light all I have to do is breathe on it wrong and it'll fire because I grounded just a little too much but not so much that it doesn't work
PoG Member # 1018
LPPC Member #71


Join The VM Empire

RIP Jack "Splattttttt" Lo Cicero 1957-2020

Homebrew Stock Class Feeds FS

Chaos is online now   Reply With Quote