|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|07-26-2006, 12:01 PM||#1 (permalink)|
Ok so I picked this beast up. it's a minimag, with a pump kit. So it leaked when I got it and I replaced the O-rings, put her back together and now it's all messed up.
Here's the deal, I pressurize it shoot no problem then I take the tank off and the trouble starts. the on/off pin is sticking in and holding pressure.
Please help I don't know what is causing this or how to fix the problem
|07-26-2006, 12:19 PM||#2 (permalink)|
take the wave spring out, and shoot it in semi for a while to work in the o rings. It sounds like your on/off is just too sticky. Sometimes you need to work new o-rings in.
|07-26-2006, 01:45 PM||#5 (permalink)|
That is a common problem with Mags. As Knightmare stated you may need to break in the orings. Seeing that I still have the same issue on my classic mags and I know the orings are broken in, you can do what I have found that works. When you go to remove your tank, hold the trigger in. While holding the trigger in, unscrew your tank and depressurize your Mag. This will empty the dump chamber and close the on/off so no more air will pass through it to pressurize it.
"How would you like one across your lip?" - Fred G. Sanford
History: Line SI Bushmaster; PMI-3; VMX; '97 Autococker; KP-3; Enforcer 2(possible SWARM); Spyder Sonix; Monteneel Z-1; PGP 2K; BBT Typhoon; 2k1 SP Impulse; SP MiniMag; another PMI-3; VM-Magnum; Blazer #153; Pump MiniMag; Thrasher ULE Emag; Cool Camo Micromag; '94-'95(?) Evolution Minicocker; '95 Evolution Autococker; Blazer #710; CNC X-Mag; Gold Rush Micromag; Jungle Sunset Micromag; Wild Tiger Micromag
|07-27-2006, 03:51 PM||#9 (permalink)|
Join Date: Jul 2006
Location: Clinton, MO
I could always be wrong but I think if you hold the trigger in while you unscrew the tank it causes air to be stored in the dump chamber.
durring a cycle the bolt returns when the air in the chamber is no longer at a high enough pressure to keep the bolt forward so the bolt comes back and reseals on the power tube o-ring. the air can't escape out the power tube because of the bolt and the on/off would be closed so it would be traped on both sides.
I think with a Pmag setup the wave spring still lets the bolt come back far enough to seal in the power tube but keeps it far enough forward that the sear cannot let the on/off open again so the air is trapped.
try cocking it and then degassing while it is cocked then when the air drains pull the trigger to releave the pressure on the wave spring.
I b da fat one
If loud pipes save lives imagine what bright pink helmets could do.
my feedback https://www.mcarterbrown.com/forums/f...-feedback.html
|Thread Tools||Search this Thread|