mcarterbrown.com  

Ask The Experts You ask the tough questions

Reply
 
Thread Tools Search this Thread
Old 09-30-2017, 03:36 AM   #11 (permalink)
AKA Maggy Moo
 
magmoormaster's Avatar
 
Join Date: Jun 2009
Location: Orem, UT

Quote:
Originally Posted by Jahnman View Post
That's a 2k5 Superstock (Superstock came with a worrblade, Prostock was a mech). That's the correct front block. ANS reg, stock pneumatics, worrblade (rebranded eblade e1), stock ASA, stock bolt, upgraded feedneck. Youd have to describe whats wrong with it first. It could be anything honestly. But that's a great deal if your friend just handed it to you. Fix it up and play with it.
You're right tht the worrblade is a rebranded e1, but the frame that came with superstocks (like the one in the OP) is a worrframe, also known as a select fire frame. Very different in terms of board programming and compatibility.

To the OP, if the board isn't turning on with a fresh battery you'll probably need a new board.
__________________
Feedback

Quote:
Originally Posted by Chad Thompson View Post
Who is this Chad Thompson you all are talking about?
Virtus Et Peritia
magmoormaster is offline   Reply With Quote
Old 09-30-2017, 07:38 AM   #12 (permalink)
Seasoned Member
 
NYKNIGHT01's Avatar
 
Join Date: Oct 2016
Location: NY

Could be a pin on the oled....can u get a close up of it? From left of where the battery sits...
NYKNIGHT01 is offline   Reply With Quote
Old 09-30-2017, 04:44 PM   #13 (permalink)
Bow Chicka Honk Honk
 
Jahnman's Avatar
 
Join Date: Sep 2017
Location: Lake Saint Louis

Quote:
Originally Posted by magmoormaster View Post
You're right tht the worrblade is a rebranded e1, but the frame that came with superstocks (like the one in the OP) is a worrframe, also known as a select fire frame. Very different in terms of board programming and compatibility.

To the OP, if the board isn't turning on with a fresh battery you'll probably need a new board.
Whoops, my bad. The SF frame completely skipped my mind. Will go back and fix my comment
Jahnman is offline   Reply With Quote
Old 09-30-2017, 04:59 PM   #14 (permalink)
could use a little doe...
 
Buck's Avatar
 
Join Date: Apr 2008
Location: Hawley PA
Send a message via AIM to Buck Send a message via MSN to Buck

Fan of EMR
That is a 05 Prostock with the Worrframe SF. A very nice marker that doesn't need much upgrading.

Make sure there are No jumpers between the 3 sets of pins along the side of the board that would be closest to the palm of your hand while holding it.

https://puu.sh/xMQbT/6ecde27117.jpg See where that green circle is? there should be no jumpers there. The marker came with one jumper that you use to change firing mode. Semi mode is enabled by not having it on. We can try different modes once we know that your marker works.

The 9 volt battery goes in that grip, you may have to look at the markings on the board to make sure you are putting it in the right way. Use a fresh new 9 volt because sometimes these can be picky.

Turn the marker on by pressing that black square on the spine of the grip.

That should light up and do make weird clacking noises as you press the trigger.

If you can't get it to respond at all your gripframe may be toast and you will need to get a new one. Those were generally less desierable frames to the other high performance options so you should be able to get a used and working one fairly cheap on here.

If it does work we can get you set up with an air tank and a hopper and anything else you might need.

Good luck!
__________________
THE REAL BUCK!! ACCEPT NO IMITATIONS!!

<Pif> I bet. Sandriges are the epitome of awesome. Coolest electro ever.
<Pif> If it could move itself, I'm sure it would attempt to hunt down John Connor.

Quote:
Originally Posted by scottthetot View Post
no ones gonna want to fight something dressed as a giant deer
Buck is offline   Reply With Quote
Old 09-30-2017, 09:41 PM   #15 (permalink)
Old gear!
 
Join Date: Oct 2007
Location: Dallas

The other nice thing about these is that timing is very, very simple... Just make sure your hammer lug is deep enough to catch, and shallow enough that the when you pull the trigger, it lets go. Assuming you can get the solenoid to clack.
__________________
Quote:
700 shipped Possibly pending member applying for loan
Only on MCB...

https://www.mcarterbrown.com/forums/f...-feedback.html
flyweightnate is offline   Reply With Quote
Old 10-06-2017, 05:42 PM   #16 (permalink)
Rec Poster
 
Join Date: May 2017

Thank you all for all the help!!! I haven’t checked this thread in awhile which is why I haven’t been able to reply. Thank you all for all the help
Paintball4life is offline   Reply With Quote
Old 10-08-2017, 11:22 PM   #17 (permalink)
Active Member
 
timekeeper's Avatar
 
Join Date: May 2009
Location: Guatemala

That's not an SF board, it's a tadao yakuza, the frame was modified to accept eblade boards. The oled displays on yakuza boards burn out with time, there are no replacements available; tadao was replacing the oled with a tricolor LED and flashing it with musashi LED code. It looks to be the USB version, so you can hook it up to a computer with any generic USB->micro USB cable and adjust it from there without having to change any components on the board (you will need the software though, it's still available at tadao's website).

Last edited by timekeeper; 10-08-2017 at 11:28 PM.
timekeeper is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » Ask The Experts

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:41 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC