|Ask The Experts You ask the tough questions|
| ||Thread Tools||Search this Thread|
|05-21-2020, 05:39 AM||#1 (permalink)|
Join Date: Apr 2007
Help with Nummech
Does anybody know a good way to get a hold Nummech
They’ve had my autococker body since December 20 it is just getting the feedneck replaced
I have sent a few emails with little response and tried Facebook message with no answer
Last edited by nobbie333; 05-21-2020 at 07:13 AM.
|05-21-2020, 07:21 AM||#2 (permalink)|
Monthly Contest Host
I’ve never done business with Andy, but I’ve always gotten a response on Facebook when asking him. In fact, I recently emailed him too, through the website, and asked about an air-through Z-grip and he shot down the idea (didn’t think they’d sell) in prompt fashion. Lol.
I have seen other threads like this though. Good luck.
Team Extreme Discharge
My MCB Feedback:
WTB Thread (Markers, parts, other) updated 3/3/20
|05-21-2020, 10:23 AM||#4 (permalink)|
Join Date: Jun 2007
Location: Charleston, SC
I sent him a pm.
I will say that sending a body in to nummech to have a feedneck adapter pressed in falls under custom work for them. Andy has been pretty busy trying to machine, produce and ship stuff. The custom stuff unfortunately gets pushed off. I know that isn't what you want to hear.
I will say for future reference you can have your body and purchased feedneck/adapter mailed to someone with a shorter turn around time and is capable of still doing the work. It may cost more but the option is there.
I offer feedneck milling for nummech style feednecks and my turn around time is generally 2 weeks or less depending on work load. If it is pulling and pressing in an adapter it may be shorter. For those that do not want to wait however long, it may be an option.
I know it may not help you, but it may help others.
|Thread Tools||Search this Thread|