|Avratech Home of the Retro 7|
| ||Thread Tools||Search this Thread|
|10-02-2016, 02:52 AM||#1 (permalink)|
K7 GSX-R 750
Retro 7 issues ?
Any know issues with Gen 1 Retro 7s ? Isn't stripping of the bolt or something ? and 12 changer backing out slowly as its aird up ?
Tian Tao // Snatch 178kg / C&J 218kg
Shi Zhiyong / Lu Xiaojun / Mattie Rogers
|10-02-2016, 04:15 AM||#2 (permalink)|
Join Date: Jun 2008
Location: looking through the knotholes in granny's wooden leg
No problem with striped bolts that I know of. On some, mine included, the stock 12g plug would vibrate loose if you move around aggressively. I replaced mine with a cut down plug from a PGP2k, no problems since.
Potential problems, the 12g piercer and seal are proprietary, so if they go bad it could be difficult to replace.
Stuff I want or need evenually
|10-02-2016, 06:58 AM||#3 (permalink)|
Walking without rhythm
The stripped threads can be an issue on the gen 2s.
The 12g seal can be replaced with a trimmed down cci cupseal and that will stop the plug backing out.
The only issues I forsee are potentially damaging or breaking a propitary part.
Kydex Inserts for Paintball Mags for sale. - $10 each!
My business card says "You're in luck, I do two things..."
|Thread Tools||Search this Thread|