| ||Thread Tools||Search this Thread|
|03-04-2017, 07:34 PM||#1 (permalink)|
Join Date: Oct 2015
Location: East TN
So I received a Kp3 today, used and in rough shape. Everything I do doesn't seem to adjust the velocity. Tried the reg and rear velocity screw. Even tried an Ion reg. I've taken everything apart and cleaned it. Any suggestions?
Sent from my XT1635-01 using Tapatalk
|03-04-2017, 07:49 PM||#3 (permalink)|
Mr. Hoity Toity
Join Date: Jan 2012
This is not the KP3 you are looking for.
This is the Azodin KP3
|03-04-2017, 07:53 PM||#5 (permalink)|
Join Date: Apr 2006
Yeah I saw that soon as I hit 'post' and edited it..
You were fast on the draw..
|03-05-2017, 12:29 AM||#7 (permalink)|
I would say make sure the lower tube where the hammer travels, and the hammer are completely free of any dirt/dried paint. Just a tiny speck of dried paint can have a big effect
|Thread Tools||Search this Thread|