Paintball

[desertT1]

Don't they all? Granted, I bought a longer hose, but:

[danssoslow]

Originally Posted by desertT1

Don't they all? Granted, I bought a longer hose, but:

https://i16.photobucket.com/albums/b3...l/DSCN2211.jpg

He's looking for an in-line. I believe a few don't allow for the clearance to replace the macro connector with a braided line, front knob/handle clearance and all.

[hth]

So I've learned that the enmey doesn't like broken paint at all. Leaks out the bolt/breech, paint ALL OVER the engine after it chopped. Like frick, but still VERY consistent with heat so I forgive it

[henchman]

Originally Posted by hth

So I've learned that the enmey doesn't like broken paint at all. Leaks out the bolt/breech, paint ALL OVER the engine after it chopped. Like frick, but still VERY consistent with heat so I forgive it

Did you shortstroke?
I've never had a breach break/chop.

[hth]

That is possible, not sure of characteristics of short stroke

[henchman]

Originally Posted by hth

That is possible, not sure of characteristics of short stroke

I strongly suggest you do the setscrew mod.

[Zepulkinator]

OOPS2 it is. Will go along with the composite look/feel.

After I get an Ego feedneck
And maybe before I get an aftermarket bolt

[Murf425]

Originally Posted by henchman

I strongly suggest you do the setscrew mod.

And, if you're not already using one, stop listening to the guys claiming a gravity hopper is good enough. Its not. Use a Revy at the VERY least.

[Grendal50]

Originally Posted by Murf425

And, if you're not already using one, stop listening to the guys claiming a gravity hopper is good enough. Its not. Use a Revy at the VERY least.

Especially after the set screw mod!

[hth]

I'm using a revvy, no worries there. I'm kinda weary of doing the mod since if I **** up im out whatever it cost for a new frame