|Misc Paintball Items Tanks, Barrels, Hoppers. Everything else paintball related is sold in here|
| ||Thread Tools||Search this Thread|
|07-14-2019, 03:22 PM||#1 (permalink)|
Join Date: Feb 2012
Location: Fredericksburg, VA
pneumag frame #14 with wings! (ETEK frame and ASA, sleeper)
$200 shipped and PayPal'ed. No trades.
This is a sleeper pneumag frame made from an old ETEK frame, Planet Eclipse ASA, autococker LPR, Mac-33 solenoid valve, and a custom piston.
I decided to do something really different this time around. I started off with the usual tricks, but then I made a custom end mill so I could inset the valve screw. (I don't know what the technical term is, but there's a slot in the back to fit the valve screw so it doesn't stick out too far.) I also milled wings into the frame so it would fit a classic rail nicely. And of course the custom safety. The end result is something that looks really old school but shoots wicked fast.
Since this has wings, it obviously won't work on anything other than a classic AM/MM rail, so keep that in mind. And you need an RT on/off. But otherwise, this will fit any mag, and it's bolt-on ready. If I were keeping it, I would replace the grips since they're pretty worn, but they are still functional as is.
|07-14-2019, 03:52 PM||#3 (permalink)|
Join Date: Jul 2018
Location: New York
Big fan of your work. I think I have a PM5 frame you modded as well.
Edit: Mocked it up and while it looks good, it's not quite right for my particular build.
Good luck with your sale!
Last edited by Xyxyll; 07-14-2019 at 05:42 PM.
|Thread Tools||Search this Thread|