-   Sheridan (
-   -   double barrel ? (

fubar1985 09-23-2012 08:08 PM

double barrel ?
hey guys

iam wondering if its posible
to convert say kp3 or any other sheridan/pmi to double barrels

yes iknow palmers does it but iam not willing to spent 1000dollars for it

and because i have the skills to pull it off myself i only need some info on how to rework de lower tube and where i can get meself the parts

if any off you guys got some info that will be apricaided
sketches or whatever

kind regards

Fluff 09-23-2012 08:21 PM

All Palmers doubles are scratch builds. Something about it works out better with the required air volume.

ksciupider 09-23-2012 08:25 PM

What do you want to know?
I can help out any time.
But WALZ would be a better source for info since hes made more Double barrels.

1. Faster Route: you could go the route of buying 1 kp and barrel tubing from Tymcneer to make the second barrel and just milling from there. This is a little quicker but you would still need to patch holes which can be a pain.

2. Cleanest route but more difficult: You buy valve and barrel tubing from Tymcneer and and go from scratch. This gives the ability to use a cartridge valve which is alot more modifiable in my option. Then once you get all the milling done you can buy the other parts. Also makes the whole gun CLEAN. If you go this rute you need to measure 5 times before any cuts because a error could mess up alot...

ksciupider 09-23-2012 08:28 PM

Great thread started by Pillage

MrBig 09-23-2012 08:45 PM

Or I could sell you a Nasty Typhoon and you could drop it into a stock. Just thought I would add that. :)

chplnstone 09-23-2012 08:48 PM

no problems using an existing marker, just gotta have an idea of what you're doing. k-series is the best platform for double barrels with the longer hammer travel and weight, makes the needed increased dwell time easier. strip it down, sweat it apart, heat up the core and rotate it to seal the old transfer hole location, resolder it, then mill a wider cocking slot. i've done a couple using bluestreak valve tubes and one out of a pgp, k-series is definitely more user friendly

double automated bluestreak build in-progress pic, can see the new transfer holes drilled after-the-fact from underneath then filled using 1/4-28 grub screws, palmers style:

earlier bluestreak build, showing side and underside with transfer holes plugged:

fubar1985 09-23-2012 09:24 PM

who you guys are quick gehehe

i was thinking off buying a mates kp3 and go from there

got some expairiance doing this

dont look at the stock iam gonna look voor a m1garant this week
or make a new one

and this is my piranha lb didt the top tube myzelf

thats why iam looking in doubles because i want to take it to the next level


tymcneer 09-23-2012 09:33 PM

I can also sell you a fully machined valve tube, barrel tubes and feed tubes to your specifications, and then you can solder it up yourself.


fubar1985 09-23-2012 09:53 PM

tanks tymcneer
butt that will take al the fun out of doing it gheheh butt i will still be needing dose brass barrels and they are not selling them anywhere in europe (not sofar as i could find out )


tymcneer 09-23-2012 09:54 PM

Contact me via PM to order barrel stock.


All times are GMT -4. The time now is 02:35 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC