| ||Thread Tools||Search this Thread|
|08-08-2014, 10:59 AM||#1 (permalink)|
Join Date: Jun 2014
Milling dovetail on Ion
Has anyone milled a dovetail on the bottom of the Ion frame? Is the metal of the frame strong enough to support a tank after being milled?
I have an inline LP max flo that I'd like to use on a project Ion rifle so I could negate the use of a second regulator.
I'm looking for a pump - Have Up'd Ion for trade - PM ME
When I go golfing I bring two pair of paints in case I get a hole in one.
Allegheny College Paintball - Founder and Alumni
ΔTΔ Fraternity Alumni - TCFP
|08-08-2014, 10:37 PM||#3 (permalink)|
Join Date: Mar 2009
Location: Santa Cruz Mountains
Actually the stock frame is very soft.I've "milled" it very easily with a dremmel bit on a drill press.I don't know that a dovetail would last
I've done a few Relay conversions,they haven't snapped yet but I run them with small bottles or on a remote line
If you can find a NDZ(Scorpion) frame they have a premilled dovetail,it's even very close the the Relays dovetail but haven't confirmed this by measuring
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
|Thread Tools||Search this Thread|