What did you 3D print today?

[BrickHaus]

I took Rainmaker s tpu feedneck topper adapter from Thingiverse. I modeled a 45 * offset into it with the loft feature, and printed one off. Seems to work! Paint feeds, and it's sluggish on both ends. I think it needs more infill with the 45* in it. an empty rotor feels like itll wobble on you if shake it hard enough. A lighter hopper would be totally fine.

I may rip another off with 60% infill to see if the clamp force on the marker is better.

[BrickHaus]

Ive had the files, and the bearings on hand for over a year. Finally got around to printing a second filament roller for my other printer. It'll help reduce drag on my extruder motors.

[kingmt]

A bunch of autococker bolts, pull pins, and retainers

Turns out Fusion 360 changed their thread builder since the last time I created and printed a design with threads. From what I gather the new builder is correct and the old one flawed. It just happened that the flaw make 3d printed threads work and the new ones are too tight. I adjusted the treads and I am printing up some test bolts and nuts to see if I need to go with variant A or B


As you can see orienting the faces to the build plate was a bad idea, removing the supports chewed up the walls on the face of the bolt.


This is one of the things I love about resin printing, fine detail.

[BrickHaus]

This past weekend, I churned out this tpu buttpad for this stock. Its printed with 5 walls, and 15% infill with the lines pattern for max fluff.

A while back, skully/a5 proved his printing prowess by easily making me this AR compliant stock out of wood PLA. As I told him I wish I could print wood pla for stuff exactly like this.

We had to break it the model as it was too big for his print bed. , but he made a nice little biscuit joint in tinker cad. And I used wood glue to bond them together. It's kinda ugly, but it held up to my sanding it at least.
Tonight I hit said stock with some 150 grit, and 2x coats of walnut stain. It's cool enough.

[Budster]

Printed this frame for my pgp that just slides on and has a built in speedfeed with a feedgate. was going for the judge dredd look of the lawgiver. silk gold pla. it works good got to use it a couple of times already.

[BrickHaus]

I dig this!

[chops]

Couldn't find a GoPro mount that would work with the CRBN Zero's tiny vent holes so I made a quick one.

[RAZRBAKK]

Well, the Ender has been collecting dust for the past couple months.

I decided to fire up a test print with PLA just to make sure everything was working, and it was a dumpster fire. I had the choice of spaghetti or blob of death.

Put it back to CF-PETG, and it's perfect. I dunno.

Designed a new feed for the Trracer build, and other than some stringy bits, the "test print" came out great so I'm keeping it.




I'll be uploading the STL for this feed in the next week or so once I've refined it.

Now onto the commissioned work...

[BrickHaus]

You design this one?

[RAZRBAKK]

BrickHaus Yessir.

[Jordan]

That feed is pretty sweet.

[BrickHaus]

24 hours into a 27 hour print....... I was at work to boot.

[BrickHaus]

Alexndl it's clear TPU. I plan on making a matching fore grip and grip panels for the cat.

I think I'll print the panels next, just to lick my wounds.

[Jackson]

Cool, someone else printed one of my models.

[BrickHaus]

Jackson. I've made like 10 of these. I love it, and have given them away. They hold up much better out of TPU.

[goofyman23]

Created a roof scoop for an LED lightbar. Will be curious how it holds up to bashing (PETG for now).

[XEMON]

Not much (yet 😅) but the first prints are impressive 🤯

[BrickHaus]

I finally succeeded getting my clear tpu cat grip printed. Just took more brim, and some glue on the bed. Thanks again for the sick idea Jackson. Your contribution to Walzmas will not go unnoticed.

[Chemical-x.....ahain]

Dude I F***ing love that sweet job Brickhaus! Are we uploading to somewhere then linking to the forum? I made a flat ring .3mf for Sheridan bolts, Id assume they'll work on other bolts. I've also got a few other prints to load up.

How many people are running Bambus?

[Frmrspec]

How many people are running Bambus?

I am.. I don't have the time or patience to deal with all the issues traditional printers used to have. I needed something that just worked, and it certainly does. Now I'm starting to entertain the idea of building a voron.

[The Great Equalizer]

I've been considering getting into 3d printing and I'm not smart enough to fix things fast and don't have enough time to fix things slow, so I've been leaning toward one of these too.

[XEMON]

I have the Q1 pro and I'm amazed at the quality and ease of doing anything ... I was printing in half an hour of opening the box and the tuning is all automatic, I haven't touch anything and it prints perfect.

[Frmrspec]

Currently designing an adapter for the CCM M40 that will allow me to throw an AR grip on it and run a bottle out the back. Will be machined from aluminum once I get it all dialed

[XEMON]

MSSR40?

[Frmrspec]

A complete mock up… still have some things to play with.

[XEMON]

That looks awesome!